Editor's Choice - Our Favorite leyouyou520 Aquarium Décor Tank Dividers

1. leyouyou520 4 Pcs Grid Divider Tray Egg Crate Aquarium Fish Tank Filter Bottom Isolate

User Ratings: 47 6

leyouyou520 First Impressions

"Very happy with purchase."

It was a bit too wide for my tank, so I cut it a bit and it's perfect. My dog can use her indoor potty and keep clean and dry above the pad. Divider works well for our two Bettas that share a 10 gallon aquarium. I did not receive suction cups but I had my own to it did what I was looking for. Not sure I would recommend it for fry however. And I've been in the hobby a long time! The female is on the larger side with her babies.

  • leyouyou520 4 Pcs Grid Divider Tray Egg Crate Aquarium Fish Tank Filter Bottom Isolate
  • Brand new and high quality
  • Material: Plastic
  • Color: Black
  • Size: 30cmx15cm/11.81*5.9 inch
  • Package includes: 4 Pcs Fish Tank Filter Bottom Isolate Grid
  • Manufacture: Leyouyou520
  • Editor's Impressions Of The leyouyou520
  • Quality
  • Value For Money
  • Affordability

leyouyou520 Final Thoughts

"The choice is yours!"

And I've been in the hobby a long time! You will need fingernails to peel them. However, it was easy to install and it worked pretty well in the last few weeks. Doing these two things really keeps this thing in place. I got this so I could put two male bettas in a tank. I used this to separate my two Betta fish in a 10 gallon tank. They look like the edging that's on the tanks, so it's as attractive as possible.

Overall Score
4.0


(39 Points)

2. Lifewithpets 10 Gallon Fish Tank Divider (2 Pack) Check Compatible Tank Below.

User Ratings: 61 13

Lifewithpets First Impressions

"The divider works well."

A silicone tray, Charcoal potty pad, and this grid. I found these and now have 6 of them for my male bettas. I cam keep my 2 betta fish in the same tank now. Make sure you read the instructions and have the right type of aquarium! Holes are drilled evenly and it will divide fish 1. It is a bit tricky to straighten it and clip it, but with a bit of a push, it's fine. 6-25-19- I had to make a minor adjustment to my divider.

  • Lifewithpets 10 Gallon Fish Tank Divider (2 Pack) Check Compatible Tank Below.
  • Compatible with Aqueon tank size 20.25"x10.5"x12.6" only. All 10 gallon tanks are NOT the same size. Please check tank size before buying.
  • Easy to install and maintain - No Suction Cups Required. An install video link is included on the instruction sheet.
  • Made from a solid, sturdy non toxic material.
  • Adjustable sidebars for the perfect fit
  • Not suitable for reptile tanks unless siliconed in place.
  • Manufacture: Gardner Creative Innovations Inc
  • Item Weight: 1.8 Pounds
  • Editor's Impressions Of The Lifewithpets
  • Quality
  • Value For Money
  • Affordability

Lifewithpets Final Thoughts

"Love these!"

Only reason I took a star off was the price. You can also try any other small fish. Doesn't obstruct the look of my fish tank. We have four South American cichlids that do not live in harmony together. I also found out small fish can easily swim between the gaps on the sides. So I dont need the suction cups even though I'm glad I have them. I turn a 10-gallon tank into three, 3.

Overall Score
4.1


(10 Points)

3. spritool DIY Designed Clear Easy to Bent Cutting and Combined for Most Fish Tanks (Suction Cups are ...

User Ratings: 56 11

spritool First Impressions

"Love this seat cover."

They can see each other but they can't fight. Would recommend two smaller filters on either side to help water flow. Im using them to hold airline tubing. This product is one that I would be really sad to see disappear. It is a bit tricky to straighten it and clip it, but with a bit of a push, it's fine. I actually like how tight it fits so it won't get dislocated accidentally. Giving it 4 stars due to the high price of something so simple.

  • spritool DIY Designed Clear Easy to Bent Cutting and Combined for Most Fish Tanks (Suction Cups are not Included)
  • 4 PCS /PKG
  • Manufacture: Spritool
  • Editor's Impressions Of The spritool
  • Quality
  • Value For Money
  • Affordability

spritool Final Thoughts

"Love this seat cover."

The only con is that it's see through. Giving it 4 stars due to the high price of something so simple. Purchased this to temporarily divide a 20-long tank for axolotls. The first time we tried using this, we cracked an empty one. It was a bit too wide for my tank, so I cut it a bit and it's perfect. Doing these two things really keeps this thing in place. It worked well in my very small 12 gallon show tank.

Overall Score
4.0


(182 Points)

4. OBANGONG 6 Pcs Grid Divider Tray Egg Crate Louvre Aquarium Fish Tank Bottom Isolation

User Ratings: 67 5

OBANGONG First Impressions

"Works great."

The only con is that it's see through. Easy to use and perfect for my tank! Not worried about the small fish due to the size of the fry. This product is one that I would be really sad to see disappear. I personally only want to put the separator in for just feeding time. My male bettas could see each other along the top of the divider. Take it from us— follow the instructions about what type to use!

  • OBANGONG 6 Pcs Grid Divider Tray Egg Crate Louvre Aquarium Fish Tank Bottom Isolation
  • Size:Approx.30cmx15cm/11.8inch*5.9inch
  • You can easily divide your tank into several compartments with these divider holders.
  • Use these divider holders for separations of different fish,for breeding and to prevent your fish to fight as well.
  • Handy clips to divide a bigger fish tank into several compartment for breeding or separation.
  • Package Included:2 Pcs White Grid Dividers 4 Pcs Black Grid Dividers
  • Manufacture: Clarity Deals
  • Editor's Impressions Of The OBANGONG
  • Quality
  • Value For Money
  • Affordability

OBANGONG Final Thoughts

"Works pretty well."

It is a thick sturdy plastic, and the suction power is strong. That was another battle trying to get those on. The product comes with many small plastic pieces. Works great and we have it holding a divider in a lizard tank. Fish can't swim to the other side anymore, and it looks super cool. Holes are drilled evenly and it will divide fish 1. Second- Do not recommend for bettas or small fish!

Overall Score
4.3


(59 Points)

5. MiguCo 4pcs Aquarium Top Cover Bracket Acrylic Fish Tank Lid Support Holder Clip

User Ratings: 23

MiguCo First Impressions

"Shipping was immediate."

I mean, it's an aquarium divider lol. I cut it to size using a paper cutter because it was easier than scissors. I am going to put a Male betta on each side. Take it from us— follow the instructions about what type to use! I cut it to size using a paper cutter because it was easier than scissors. Very pleased with this tank divider. The first time we tried using this, we cracked an empty one.

  • MiguCo 4pcs Aquarium Top Cover Bracket Acrylic Fish Tank Lid Support Holder Clip
  • Made of high quality acrylic material, sturdy and durable for long time use
  • Available for all kinds of open fish tank/pet box without tension and need to be covered
  • Can be hung directly on the edge of tank wall from 6mm to 12mm in thickness
  • Designed with two screws to tighten up and make it more stable
  • Compact size, easy to install and use, a wonderful accessory for aquariums and fish tanks
  • Manufacture: MiguCo
  • Editor's Impressions Of The MiguCo
  • Quality
  • Value For Money
  • Affordability

MiguCo Final Thoughts

"Works perfectly."

Very pleased with this tank divider. Doesn't obstruct the look of my fish tank. I know Betta fish are aggressive, so they must be separated. So I'm writing this to tell you you step on them. It's good for what I needed it for. Product works great if you can figure out how to fit it into your fish tank. I bought these clear suction cups separately.

Overall Score
3.5


(5 Points)

6. 5pcs Divider Sheet Holder Suction Cup for Aquarium Fish Tank

User Ratings: 65 3

MECO First Impressions

"Good price."

My only small issue with it is the way it attaches to the tank. And if you fill your tank very full with water they can swim over the divider. I am going to put a Male betta on each side. Get this if your dividing your tank for betta fish. You can also try any other small fish. It is easy to install but, careful not to lose anything. There are slots along the top that they can see through.

  • 5pcs Divider Sheet Holder Suction Cup for Aquarium Fish Tank
  • Easy to install in your aquarium tank.
  • You can easily divide your tank into several compartments with these divider holders.
  • Handy clips to divide a bigger fish tank into several compartment for breeding or separation.
  • Use these divider holders for separations of different fish, for breeding and to prevent your fish to fight as well.
  • With suction cup clamp, horizontal or vertical isolation space free, or as a fish tank base or a small accessory for fish tank landscaping.
  • Manufacture: Elecday
  • Editor's Impressions Of The MECO
  • Quality
  • Value For Money
  • Affordability

MECO Final Thoughts

"Thank you!"

The holes are smaller than some other similar dividers, which is why I chose these. They look like the edging that's on the tanks, so it's as attractive as possible. I bought these clear suction cups separately. I'm not using it but keeping it in case. Third- pull the divider all the way up. I turn a 10-gallon tank into three, 3. Overall I was pleased with this divider.

Overall Score
4.2


(43 Points)

7. LANDUM 5Pieces Aquarium Fish Tank Divider Suction Cup Divider Plastic Sheet Holder Set White

User Ratings: 50

LANDUM First Impressions

"I highly recommend!"

It was a bit too wide for my tank, so I cut it a bit and it's perfect. It dose have good flow between the tanks. Holes are drilled evenly and it will divide fish 1. I'm separating male and female cichlids. There were scratches when we got this so I originally gave it one star review. I had an oddly aggressive Molly and this worked great for the time I needed to use. And if you fill your tank very full with water they can swim over the divider.

  • LANDUM 5Pieces Aquarium Fish Tank Divider Suction Cup Divider Plastic Sheet Holder Set White
  • Plastic + Rubber
  • ㊥Safe and Durable: made of plastic material, non-toxic,no harm to fish
  • ㊥Strong Suction: Firmly adheres to the fish tank wall, long service life
  • ㊥Trouble-tree Installation: Handy clips to divide a bigger fish tank into several compartment for breeding or separation
  • ㊥Protect Fish: Form two separate spaces to protect young and sick fish
  • ㊥Low Maintenance: Easy to clean and operate
  • Manufacture: LANDUM
  • Editor's Impressions Of The LANDUM
  • Quality
  • Value For Money
  • Affordability

LANDUM Final Thoughts

"Very carefully machined."

It comes with MANY suction cups and attachments. This WILL fit an Aqueon tall 10 gallon, but NOT a Top Fin tall 10 gallon. I am going to put a Male betta on each side. You can also try any other small fish. Make sure to set it up in the middle of the water pump. A silicone tray, Charcoal potty pad, and this grid. Barrier is like a plastic mesh screen that allows water to flow through.

Overall Score
4.5


(2 Points)

8. 4X Aquarium Fish Tank Plastic Clips Glass Cover Strong Support Holders 10mm

User Ratings: 55 9

Generic First Impressions

"The choice is yours!"

Very pleased with this tank divider. Overall this has done the job I've needed to. Second- Do not recommend for bettas or small fish! I mean, it's an aquarium divider lol. I've bought several of these to divide my betta's and they've been great! I cut it to size using a paper cutter because it was easier than scissors. It's good for what I needed it for.

  • 4X Aquarium Fish Tank Plastic Clips Glass Cover Strong Support Holders 10mm
  • Manufacture: Generic
  • Editor's Impressions Of The Generic
  • Quality
  • Value For Money
  • Affordability

Generic Final Thoughts

"Sold separately."

That was another battle trying to get those on. Works great and we have it holding a divider in a lizard tank. Barrier is like a plastic mesh screen that allows water to flow through. That was another battle trying to get those on. Two were forced to spend most of their time in hiding. I turn a 10-gallon tank into three, 3. You will need fingernails to peel them.

Overall Score
3.9


(25 Points)

9. Ewook Aquarium Fish Tank Divider Isolation Bord for Mixed Breeding Made by PET

User Ratings: 42 7

Ewook First Impressions

"Works as intended!"

The only con is that it's see through. The first time we tried using this, we cracked an empty one. And if you fill your tank very full with water they can swim over the divider. This was clear, easy to install, and well made. However, keep in mind this tank divider does not fit just ANY 10 gallon! They can see each other but they can't fight. Small, skinny betta can go through those.

  • Ewook Aquarium Fish Tank Divider Isolation Bord for Mixed Breeding Made by PET
  • Safe Matriral: Made By High Quality PET Material,None Toxi Release in Water.Same Material As Bottle Water.
  • Creative Parts: Offer 8 sets adjustable Isolation Plate Suction Cups,Easily to Fix and Move.
  • Product size 11.8`` * 11.8`` (30CM*30CM), suitable for most standard or non-standard American fish tanks
  • Transparent partition design (with white protective film to be removed before use), can be bent, cut, assembled
  • It is transparent design and high-grade environmentally friendly materials to provide adequate protection for your fish safety.
  • Manufacture: TKMB
  • Editor's Impressions Of The Ewook
  • Quality
  • Value For Money
  • Affordability

Ewook Final Thoughts

"5 gallon fabric pots."

A silicone tray, Charcoal potty pad, and this grid. Giving it 4 stars due to the high price of something so simple. My dog can use her indoor potty and keep clean and dry above the pad. I'll keep it for separating parts of my tank as I plant new areas but not for fry. Im using them to hold airline tubing. Not worried about the small fish due to the size of the fry. Doing these two things really keeps this thing in place.

Overall Score
3.8


(92 Points)

10. Lifewithpets 20 Gallon High Tank Divider. Check Compatible Tank Below

User Ratings: 61

Lifewithpets First Impressions

"They were all awful!"

You will need fingernails to peel them. I used this product to divide my 10gallon tank. Easy to use and perfect for my tank! You can also cut it down to the size of your tank, which was not too difficult to do. I cam keep my 2 betta fish in the same tank now. This product is one that I would be really sad to see disappear. If you have the divider in the gravel it will not meet the top of the tank.

  • Lifewithpets 20 Gallon High Tank Divider. Check Compatible Tank Below
  • Compatible with Aqueon Tanks size 20 Gallon High 24.25"L x 12.5"W x 16.75H Only. All 20 Gallon High tanks are NOT the same size. Please check tank size before buying.
  • Easy to Install and Maintain - No Suction Cups Required.
  • Made from a solid, sturdy non toxic material.
  • Adjustable Sidebars for the perfect fit
  • Not suitable for reptile tanks unless siliconed in place.
  • Manufacture: Gardner Creative Innovations inc
  • Editor's Impressions Of The Lifewithpets
  • Quality
  • Value For Money
  • Affordability

Lifewithpets Final Thoughts

"Worked perfectly."

You need to use a mallet to connect the panels together. I personally only want to put the separator in for just feeding time. I actually like how tight it fits so it won't get dislocated accidentally. It is thick, well made and a great addition if you have the tank they specified. You need to use a mallet to connect the panels together. For platty fry I reccomend the Petzilla Aquarium Fish Breeder box. This WILL fit an Aqueon tall 10 gallon, but NOT a Top Fin tall 10 gallon.

Overall Score
4.2


(3 Points)

Copyright © 2021 Rob Aquatics — Primer Child WordPress theme by GoDaddy