Editor's Choice - Our Favorite uxcell Aquarium Décor Tank Dividers

1. uxcell Pairs Aquarium Tank Glass Cover Clip Support Holder 4-12mm

uxcell US-SA-AJD-22515 First Impressions

"Worked like a charm."

First- When dividing a 10 gallon tank the flow is not the same. Take it from us— follow the instructions about what type to use! The fry didn't understand so they swam through the sides. You will have to cut them to fit any other size aquarium. Let's water flow freely through our entire tank. It was slightly long so I had to trim off the bottom edge to make it fit. I had ordered 3 others before this one.

  • uxcell Pairs Aquarium Tank Glass Cover Clip Support Holder 4-12mm
  • Prodcut Name : Fish Tank Glass Clip;Material : Plastic
  • Thickness : Fit for 4-12mm;Total Size : 14 x 4 x 3.5cm / 5.5" x 1.6" x 1.4"(L*D)
  • Color : Clear
  • Net Weight : 88g
  • Package Content : 2 x Fish Tank Glass Clip
  • Manufacture: uxcell
  • Editor's Impressions Of The uxcell US-SA-AJD-22515
  • Quality
  • Value For Money
  • Affordability

uxcell US-SA-AJD-22515 Final Thoughts

"Definitely not easy."

And since it has been working ok, I decided to change the review to 4 star. Two were forced to spend most of their time in hiding. I had an oddly aggressive Molly and this worked great for the time I needed to use. This is a great option for keeping two bettas in the same tank! The holes are smaller than some other similar dividers, which is why I chose these. I know Betta fish are aggressive, so they must be separated. Barrier is like a plastic mesh screen that allows water to flow through.

Overall Score
5.0


(3 Points)

Peoples Choice - Other Highly Rated uxcell Aquarium Décor Tank Dividers

2. uxcell Aquarium Betta Tank Black Plastic Separation Divider Isolation Grid Board 6pcs

uxcell a17080700ux0709 First Impressions

"Works great thank you."

4stars because it says easy to connect peices together. Doing these two things really keeps this thing in place. You need to use a mallet to connect the panels together. My male bettas could see each other along the top of the divider. Holes are drilled evenly and it will divide fish 1. My male bettas could see each other along the top of the divider. It is a thick sturdy plastic, and the suction power is strong.

  • uxcell Aquarium Betta Tank Black Plastic Separation Divider Isolation Grid Board 6pcs
  • Color: Black; Package Content: 6 x Aquarium Isolation Board
  • Product Name: Aquarium Isolation Board
  • Material: Plastic; Net Weight: 251g; Size: 30 x 15 x 0.6cm / 11.8" x 5.9" x 0.2" (L*W*H)
  • Used as a plate for bottom filtering, favorable water cycle.
  • As a fish tank base or a small accessory for fish tank landscaping.
  • Manufacture: uxcell
  • Editor's Impressions Of The uxcell a17080700ux0709
  • Quality
  • Value For Money
  • Affordability

uxcell a17080700ux0709 Final Thoughts

"So it's nice decision."

This are black in they stick to the tank not like glue or anything lol. Very tight fit with hardly any gap. Two were forced to spend most of their time in hiding. I'm separating male and female cichlids. Very good divider for my 20 gal long freshwater aquarium. It is thick, well made and a great addition if you have the tank they specified. Very tight fit with hardly any gap.

Overall Score
5.0


(2 Points)

3. uxcell Plastic Aquarium Tank Side Tools Hanger Wall Mount Holder Clear

uxcell a14062000ux0363 First Impressions

"Excellent product!"

I can see why people thought it was white. Purchased this to temporarily divide a 20-long tank for axolotls. Holes are drilled evenly and it will divide fish 1. Make sure you read the instructions and have the right type of aquarium! The divider itself works very well and seems sturdy. The holes are smaller than some other similar dividers, which is why I chose these. I know Betta fish are aggressive, so they must be separated.

  • uxcell Plastic Aquarium Tank Side Tools Hanger Wall Mount Holder Clear
  • Product Name : Aquarium Hose Hanger;Color : Clear
  • Material : Plastic;Fit for : Aquarium, Fish Tank
  • Size : 5.5 x 4.5 x 2.5cm/ 2.2" x 1.8" x 1" (L*W*H)
  • Weight : 19g
  • Packaging Content : 1 x Aquarium Hose Hanger
  • Manufacture: uxcell
  • Editor's Impressions Of The uxcell a14062000ux0363
  • Quality
  • Value For Money
  • Affordability

uxcell a14062000ux0363 Final Thoughts

"Very sturdy."

The only con is that it's see through. Only for betta fish since I own them. Overall this has done the job I've needed to. The product comes with many small plastic pieces. This product is one that I would be really sad to see disappear. I will be buying more of this I recommend them 100%. Two were forced to spend most of their time in hiding.

Overall Score
5.0


(1 Points)

4. uxcell Betta Fish Tank Aquarium Black Plastic Square Separation Board Isolation 4pcs

uxcell a17080700ux0707 First Impressions

"Go together easy."

It comes in clear so I had to rough up both sides to make it opaque. Very pleased with this tank divider. Giving it 4 stars due to the high price of something so simple. Purchased this to temporarily divide a 20-long tank for axolotls. There are slots along the top that they can see through. Doesn't obstruct the look of my fish tank. The only con is that it's see through.

  • uxcell Betta Fish Tank Aquarium Black Plastic Square Separation Board Isolation 4pcs
  • Color: Black; Package Content: 4 x Aquarium Isolation Board
  • Size: 30 x 30 x 0.7cm / 11.8" x 11.8" x 0.3" (L*W*H)
  • Material: Plastic; Net Weight: 318g
  • Used as a plate for bottom filtering, favorable water cycle.
  • To separate aquatic fish for good protection and care.
  • Manufacture: uxcell
  • Editor's Impressions Of The uxcell a17080700ux0707
  • Quality
  • Value For Money
  • Affordability

uxcell a17080700ux0707 Final Thoughts

"Works pretty well."

The holes are smaller than some other similar dividers, which is why I chose these. This is a great option for keeping two bettas in the same tank! Perfect fit, easy to install, and ideal design. I'm not using it but keeping it in case. I did have to bury the bottom in about an inch or so of gravel to keep it in place. It is thick, well made and a great addition if you have the tank they specified. The gravel along with the quick trim left no gaps for me.

Overall Score
5.0


(1 Points)

5. Sirozi 4 Pcs Aquarium Divider Tray, Fish Tank Divider Filter Plastic Grid Aquarium Egg Crate Diffuse...

User Ratings: 31 19

Sirozi First Impressions

"Worked like a charm!"

You will need fingernails to peel them. Don't think so, unless it’s not in water. I turn a 10-gallon tank into three, 3. They can see each other but they can't fight. I cut it to size using a paper cutter because it was easier than scissors. You will need fingernails to peel them. I created an inexpensive portable indoor potty for my little dog.

  • Sirozi 4 Pcs Aquarium Divider Tray, Fish Tank Divider Filter Plastic Grid Aquarium Egg Crate Diffuser with 6 Pieces Sucker Clips for Mixed Breeding, Fish Tank Bottom Isolation(White)
  • Value set: The package contains 4 white aquarium partition grid plates, and comes with 6 suction cup clips,The suction cup holder can be used to fix the isolation grid at any position in the fish tank
  • Size: The size of the aquarium isolation grid board is 11.8 X 6 inches, and the size of each grid hole is 0.39 inches, which is enough to ensure that your fish will not pass through or get stuck(Not suitable for fish smaller than mesh holes)
  • Safety material: The isolation board is made of high-quality PVC plastic, environmentally friendly and tasteless, will not affect the water quality of the aquarium, suitable for salt water and fresh water tanks
  • Flexibility: The product can be cut and spliced freely, and the size can be adjusted according to the size of your aquarium, suitable for many small fish tanks
  • Multi-function: These separation grids can effectively separate fish flesh, avoid fish from biting each other, fish separate and breed, convenient for cleaning manure, turtle ramp, or other DIY projects
  • Manufacture: Sirozi
  • Editor's Impressions Of The Sirozi
  • Quality
  • Value For Money
  • Affordability

Sirozi Final Thoughts

"And transparent."

It comes in clear so I had to rough up both sides to make it opaque. It is a bit tricky to straighten it and clip it, but with a bit of a push, it's fine. For platty fry I reccomend the Petzilla Aquarium Fish Breeder box. Small, skinny betta can go through those. I cut it to size using a paper cutter because it was easier than scissors. And I've been in the hobby a long time! I've bought several of these to divide my betta's and they've been great!

Overall Score
3.1


(6 Points)

6. Aliyaduo 8 Pack Fish Tank Divider, Snap Together & Cutting Feature - Plastic Aquarium Divider Panel ...

User Ratings: 51 7

Aliyaduo First Impressions

"So it's nice decision."

I have to trim off about a quarter inch and then they work just fine. It worked well for me and I would highly recommend it to anyone. I did have to bury the bottom in about an inch or so of gravel to keep it in place. It is thick, well made and a great addition if you have the tank they specified. Small, skinny betta can go through those. They can still see each other and try to fight through the barrier but its a no go. Very good divider for my 20 gal long freshwater aquarium.

  • Aliyaduo 8 Pack Fish Tank Divider, Snap Together & Cutting Feature - Plastic Aquarium Divider Panel Separator - Grid Isolation Board Divider, Egg Crate Fish Tank Bottom Tray
  • FLEXIBLE TO USE - each Fish Tank Divider can be snapped together to make a large panel, also can be cut easily with wire cutter to your desired size to fit your fish tank
  • EASY TO INSTALL - just slip the male into the female by placing one above the other and pushing down. You can't push horizontally. If you can not get these grids to connect together, zip ties also recommended
  • VERSATILE DIVIDERS - the fish tank partitions can be used to separate a fish that had started getting too aggressive, to elevate rocks in an Aquascape as a base level in the aquarium, to make turtle ramps for your turtle habitats, or do some other diy projects. Limitless possibilities for what these can be used for
  • DIENESIONS - each aquarium divider piece measures approx 30cm * 15cm/ 11.81 * 5.91 inch(L*W), each grid hole measures approx 1cm/0.4 inch, which is small enough that your betta fish wouldn't get through or get stuck.
  • MATERIAL - These fish tank separators are made of food-grade durable plastic material, non-toxic and tasteless, environmental protection won't affect water quality, suitable for both salt water and freshwater tank
  • Manufacture: Aliyaduo - 8pcs fish tank divider
  • Editor's Impressions Of The Aliyaduo
  • Quality
  • Value For Money
  • Affordability

Aliyaduo Final Thoughts

"Its very pretty too."

Will certainly be buying more of these! I will be buying more of this I recommend them 100%. I turn a 10-gallon tank into three, 3. I've bought several of these to divide my betta's and they've been great! Works wonders for our water turtle tank. Barrier is like a plastic mesh screen that allows water to flow through. My only small issue with it is the way it attaches to the tank.

Overall Score
4.1


(60 Points)

7. J-star 6 Pcs Aquarium Acrylic Clip for Rimless Aquariums, Glass Lid Support Holder Clip, Transparent...

J-star First Impressions

"It's fairly easy to do."

It dose have good flow between the tanks. And if you fill your tank very full with water they can swim over the divider. I would much rather be able to see my whole tank the rest of the day. The connection joints are very snug. Two were forced to spend most of their time in hiding. I bought these clear suction cups separately. It keeps the boys from being able to see each other.

  • J-star 6 Pcs Aquarium Acrylic Clip for Rimless Aquariums, Glass Lid Support Holder Clip, Transparent Clip for Fish Tank
  • Made of high-quality acrylic material, non-toxic, high transparency, beautiful and durable for a long time to use.
  • A variety of specifications meet different fish tank glass thickness, suitable for fish tanks or pet boxes that need to be covered.
  • The aquarium lid clips can be directly hung on the side of the fish tank, and equipment such as aquarium lights, filters, and fish tank covers can be placed on the bracket.
  • Fish tank clip are used for all kinds of open clear tanks, fish tanks, landscape tanks, turtle or snake tanks, and pet glass tanks that require heat preservation.
  • Easy to install and use, they are great accessory for aquariums and fish tanks. Recommended to use 4 pcs for small tanks and 6 pcs for large tanks.
  • Manufacture: J-star
  • Editor's Impressions Of The J-star
  • Quality
  • Value For Money
  • Affordability

J-star Final Thoughts

"However, I bought the 15."

Only because of that reviewer, I was able to use them the way I intended. I'll keep it for separating parts of my tank as I plant new areas but not for fry. Actually adds additional filtration I think. I actually like how tight it fits so it won't get dislocated accidentally. You need to use a mallet to connect the panels together. I got this so I could put two male bettas in a tank. We have four South American cichlids that do not live in harmony together.

Overall Score
5.0


(1 Points)

8. OIIKI 4 PCS Egg Crate for Aquarium, Fish Tank Bottom Isolation, Grid Tank Divider Tray for Mixed Bre...

User Ratings: 61 11

OIIKI First Impressions

"Otherwise very good."

Will certainly be buying more of these! My only small issue with it is the way it attaches to the tank. My dog can use her indoor potty and keep clean and dry above the pad. I did not receive suction cups but I had my own to it did what I was looking for. Very good divider for my 20 gal long freshwater aquarium. If you have the divider in the gravel it will not meet the top of the tank. You do have to assemble it yourself but that isn't too hard.

  • OIIKI 4 PCS Egg Crate for Aquarium, Fish Tank Bottom Isolation, Grid Tank Divider Tray for Mixed Breeding
  • Material: The Grid Tank Divider is made of food-grade plastic material, environmental protection, won't affect water quality.
  • Size: 11.8" x 5.9" x 0.3"/30cm x 15cm x 0.8cm.
  • Features: The tank dividers can ben stitched, splicing according to needs.
  • Application:You can easily divide the tank into several compartments with the divider holders, separating different fish, for breeding and preventing the fish to fight as well.
  • Package included: 4 PCS Grid Tank Divider in total.
  • Manufacture: OIIKI
  • Editor's Impressions Of The OIIKI
  • Quality
  • Value For Money
  • Affordability

OIIKI Final Thoughts

"5 gallon fabric pots."

I will be buying more of this I recommend them 100%. Very tight fit with hardly any gap. Purchased this to temporarily divide a 20-long tank for axolotls. Very pleased with this tank divider. Get this if your dividing your tank for betta fish. This WILL fit an Aqueon tall 10 gallon, but NOT a Top Fin tall 10 gallon. I have it in a divided ten gallon with two bettas.

Overall Score
4.1


(19 Points)

9. MiguCo 4pcs Aquarium Top Cover Bracket Acrylic Fish Tank Lid Support Holder Clip

User Ratings: 23

MiguCo First Impressions

"Shipping was immediate."

I mean, it's an aquarium divider lol. I cut it to size using a paper cutter because it was easier than scissors. I am going to put a Male betta on each side. Take it from us— follow the instructions about what type to use! I cut it to size using a paper cutter because it was easier than scissors. Very pleased with this tank divider. The first time we tried using this, we cracked an empty one.

  • MiguCo 4pcs Aquarium Top Cover Bracket Acrylic Fish Tank Lid Support Holder Clip
  • Made of high quality acrylic material, sturdy and durable for long time use
  • Available for all kinds of open fish tank/pet box without tension and need to be covered
  • Can be hung directly on the edge of tank wall from 6mm to 12mm in thickness
  • Designed with two screws to tighten up and make it more stable
  • Compact size, easy to install and use, a wonderful accessory for aquariums and fish tanks
  • Manufacture: MiguCo
  • Editor's Impressions Of The MiguCo
  • Quality
  • Value For Money
  • Affordability

MiguCo Final Thoughts

"Works perfectly."

Very pleased with this tank divider. Doesn't obstruct the look of my fish tank. I know Betta fish are aggressive, so they must be separated. So I'm writing this to tell you you step on them. It's good for what I needed it for. Product works great if you can figure out how to fit it into your fish tank. I bought these clear suction cups separately.

Overall Score
3.5


(5 Points)

10. Kayueti 4 Pcs Grid Divider Tray Egg Crate Louvre Aquarium Fish Tank Bottom Isolation

User Ratings: 73 5

Aliyaduo First Impressions

"Easy to put in tank."

I'm not using it but keeping it in case. I got this to keep my albino Koi guppies separated from my fancy males. This WILL fit an Aqueon tall 10 gallon, but NOT a Top Fin tall 10 gallon. It worked well in my very small 12 gallon show tank. I'm not using it but keeping it in case. You can also cut it down to the size of your tank, which was not too difficult to do. You can also try any other small fish.

  • Kayueti 4 Pcs Grid Divider Tray Egg Crate Louvre Aquarium Fish Tank Bottom Isolation
  • Manufacture: Kayueti
  • Product Dimensions: 11.81 x 5.91 x 0.31 inches; 6.88 Ounces
  • Editor's Impressions Of The Aliyaduo
  • Quality
  • Value For Money
  • Affordability

Aliyaduo Final Thoughts

"The choice is yours!"

For platty fry I reccomend the Petzilla Aquarium Fish Breeder box. Only because of that reviewer, I was able to use them the way I intended. I'm separating male and female cichlids. You just need to peel of the protective layer from both sides. That was another battle trying to get those on. This are black in they stick to the tank not like glue or anything lol. Description says if they dont go together use zip ties.

Overall Score
4.6


(37 Points)

Copyright © 2021 Rob Aquatics — Primer Child WordPress theme by GoDaddy