Editor's Choice - Our Favorite inTank Aquarium Hoods
1. inTank Fish Saver Guard for Oceanic BioCube 29 and Oceanic BioCube HQI
User Ratings: 76 7
inTank First Impressions
"My other one is clear."I would order this again in a heartbeat. I have an Aqueon QuietFlow 30 and it fit just fine. We were not able to get the covers on without lubricating them first. Long story short, I got rid of Dolce and Gabbana. I think a tank could have rolled over the box and the glass wouldn't have cracked! He introduced himself and then confirmed my order. I bought this tank hood and I have never been happier.
- inTank Fish Saver Guard for Oceanic BioCube 29 and Oceanic BioCube HQI
- Fits Oceanic BioCube 29 and Oceanic BioCube 29 HQI with a lower false wall
- Made of high quality acrylic. Features two clips for an easy install over the false wall
- Black color hides from view. Top piece provides and extra layer of protection from the pesky jumpers
- Does not hinder access to the chamber areas or other equipment, in most cases once installed it never needs to be removed
- Features notches cut into the sides to you can route power cords to the rear of the aquarium
- Manufacture: inTank
- Product Dimensions: 18 x 3 x 3 inches; 13.6 Ounces
- Editor's Impressions Of The inTank
- Quality [star rating='4.4']
- Value For Money [star rating='3.7']
- Affordability [star rating='3.5']
inTank Final Thoughts
"Well worth the price."Aside from these complaints I am very happy so I give it 4 stars. Overall everything came intact and its working so I'm satisfied. I got the package within a couple of days, much sooner than I expected. Aside from these complaints I am very happy so I give it 4 stars. You do have to put the LED's in yourself but it is super super easy. So I re-measured, and told him that my tank was 12. I'm so glad I finally ordered this top for my fish tank.
Overall Score
4.4
(17 Points)

Peoples Choice - Other Highly Rated inTank Aquarium Hoods
2. inTank Filtration Cover for Red Sea Max 130 | Red Sea Max 130D | Red Sea Max C-130
User Ratings: 67 17
inTank First Impressions
"Hey, they made it!"It installed easily and looks great. People complaining about fit probably didn't pat attention to the description. I AM NOT HAPPY WITH QUALITY OF PRODUCT NOR WITH LACK OF REPLACEMENT LIGHTS. Because it comes with the handles unattached so you can place them where you want. MIGHT DO YOU GOOD TO CHOOSE ANOTHER BRAND. We have a pretty quiet household though, so nobody will be knocking it off. I'm really happy with how this turned out.
- inTank Filtration Cover for Red Sea Max 130 | Red Sea Max 130D | Red Sea Max C-130
- Hides filtration equipment after you remove the hood. Hides equipment cords. Back is open so cords can be routed without being seen
- Updated design - Made from one piece heat bent and secured using tab technology. Textured outer side
- Easy to clean and install. It sits on top of your aquarium's rear area. Black in color to blend in with your existing moldings
- Works with EcoTech RMS LED mounting bracket and others. Dampens sound.
- Fits Red Sea Max 130. Fits Red Sea Max 130D. Fits Red Sea Max C-130
- Manufacture: inTank
- Product Dimensions: 23 x 4.55 x 3.25 inches
- Editor's Impressions Of The inTank
- Quality [star rating='4.1']
- Value For Money [star rating='3.9']
- Affordability [star rating='4.2']
inTank Final Thoughts
"High quality."I figured, it's perfect, it has to fit. We were not able to get the covers on without lubricating them first. Aside from these complaints I am very happy so I give it 4 stars. It has a feeding hole and holes for the cables and filter. The hooks for the back were an added bonus. Other than that, it was really easy to put together and set up. It looks sooooooo much nicer than the bulky old black top I had.
Overall Score
4.2
(7 Points)

3. inTank Filtration Cover for Fluval Evo 13.5, Fluval Evo 52L, Fluval Spec 16 and Fluval Spec 60L
User Ratings: 46 23
inTank First Impressions
"The quality is 100% good."They fit my 75 gallon aqueon fish tank like a glove. THERE ARE NO REPLACEMENT LIGHTS AVAILABLE. FACTORY WATERPROOFING IS INADEQUATE. I'm hopeful that I can trim the glass down with some emery cloth. FACTORY WATERPROOFING IS INADEQUATE. The lighting had failed in my 55 gal aquarium. It came with 8 hooks, but I only needed the 2.
- inTank Filtration Cover for Fluval Evo 13.5, Fluval Evo 52L, Fluval Spec 16 and Fluval Spec 60L
- HIDES filtration equipment, equipment cords and DAMPENS noise when stock rear cover removed. Fits Fluval Evo 13.5, Fluval Evo 52L, Fluval Spec 16 and Fluval Spec 60L
- Rear of cover is open so cords can be routed without being seen. Top, sides and front are covered
- Black in color to blend into the aquarium. Made of ultra strong and durable ABS plastic. Completes your aquarium by providing a custom look
- Easy to clean and install. Sits onto of the rear area and locks into glass walls. Cutout area to use with your with a lighting goose neck or mounting bracket. ADDITIONAL knockout(s) can be easily cut with a nipper or snips.
- Cover also features knockouts for cords and to use the inTank AIO Surface Skimmer. Made in the USA - CNC laser cut and precision bending assembly method from a single piece using tab technology. MADE IN USA
- Manufacture: inTank
- Product Dimensions: 11.1 x 3.6 x 2.5 inches; 8.99 Ounces
- Editor's Impressions Of The inTank
- Quality [star rating='4.5']
- Value For Money [star rating='4.5']
- Affordability [star rating='4.4']
inTank Final Thoughts
"This hood is excellent."I am quite happy with the product otherwise. I have a hanging filter across the back on one side. They fit perfectly on my tank, pretty thick glass& the handles attach easily. Unlike others on Amazon, this is real tempered glass and very strong. You do have to put the LED's in yourself but it is super super easy. Overall, very happy with this canopy set and you definitely can't beat the price. Aqueon has different measurements from Marineland tanks.
Overall Score
3.8
(6 Points)

4. inTank Filtration Cover for Innovative Marine Fusion 30L and Fusion Pro 30L
inTank First Impressions
"They are grey."It's nothing major just something to know if you have a stupid fish like me lol. Just be careful when doing so cause the black plastic seems a little fragile. The glass and the plastic hinge form a tight fit that is difficult to get together. It doesn't have a recessed area to help avoid movement. We have a pretty quiet household though, so nobody will be knocking it off. Easy to set up, Very good illumination. Fit my 75 gallon All Glass aquarium with split covers perfectly.
- inTank Filtration Cover for Innovative Marine Fusion 30L and Fusion Pro 30L
- HIDES filtration equipment, equipment cords and DAMPENS noise. Fits Innovative Marine Fusion 30L and Fusion Pro 30L
- Rear of cover is open so cords can be routed without being seen. Top, sides and front are covered
- Black in color to blend into the aquarium. Made of ultra strong and durable ABS plastic. Completes your aquarium by providing a custom look
- Easy to clean and install. Sits onto of the rear area and locks into glass walls. Knockout area can be removed without tools for use with a lighting goose neck or mounting bracket. ADDITIONAL knockout(s) can be easily cut with a nipper or snips.
- Cover also features knockouts for cords and to use the inTank AIO Surface Skimmer. Made in the USA - CNC laser cut and precision bending assembly method from a single piece using tab technology
- Manufacture: inTank
- Product Dimensions: 34.75 x 4.6 x 4.9 inches; 1.8 Pounds
- Editor's Impressions Of The inTank
- Quality [star rating='3.8']
- Value For Money [star rating='4.5']
- Affordability [star rating='3.1']
inTank Final Thoughts
"They were mean."I think a tank could have rolled over the box and the glass wouldn't have cracked! The hood fits perfectly on my 55 gallon tank which has a divider in the middle. Nice that the seller called to ensure a good fit before shipping. The glass and the plastic hinge form a tight fit that is difficult to get together. Had a small issue with the handles. When I purchased these glass covers, I did it with my fingers crossed. EVEN DOWN TO THE TWO SIDED TAPE THAT HOLD THE HANDLES TO THE LIP TOP!
Overall Score
3.6
(3 Points)

Honorable Mentions - More Top Selling inTank Aquarium Hoods
5. inTank Fish Saver Guard for Oceanic BioCube 14
inTank First Impressions
"I love it!"Sitting on the couch you can barely tell there's a hood on the tank. THERE ARE NO REPLACEMENT LIGHTS AVAILABLE. I am very happy with this purchase! Words cannot explain how much I adore this! When I first picked up the package, it was really light. They murdered almost every fish in my tank. When I would attempt to feed them, these monsters would JUMP out of the tank.
- inTank Fish Saver Guard for Oceanic BioCube 14
- Fits Oceanic BioCube 14 aquarium. Helps prevent fish from entering the rear chambers
- Made of high quality acrylic. Features a locking clip for an easy install that keeps the Fish Saver against the false wall
- Black color hides from view. Fish Saver provides a layer of protection from the pesky jumpers
- Does not hinder access to the chamber areas or other equipment, in most cases once installed it never needs to be removed
- Features one notch cut into the side so you can route a power cord to the rear of the aquarium
- Manufacture: inTank
- Product Dimensions: 13 x 1 x 3 inches; 4.8 Ounces
- Editor's Impressions Of The inTank
- Quality [star rating='4.1']
- Value For Money [star rating='4.5']
- Affordability [star rating='5']
inTank Final Thoughts
"3 switch positions."I mean it's the same brand and says it's for our size tank. We have a pretty quiet household though, so nobody will be knocking it off. Other than that, it was really easy to put together and set up. The plastic pieces to break out for the filter and such are perfect for my needs. I thought of putting some hot silicone to prevent this, but never got to do it. THERE ARE NO REPLACEMENT LIGHTS AVAILABLE. So I re-measured, and told him that my tank was 12.
Overall Score
5.0
(2 Points)

6. inTank Filtration Cover for Waterbox Cube 15 and Waterbox Peninsula Mini 25
User Ratings: 50
inTank WB20CV First Impressions
"So far they're sticking."They dont have any borders on them to make handling easier. I thought of putting some hot silicone to prevent this, but never got to do it. I mean it's the same brand and says it's for our size tank. Nice that the seller called to ensure a good fit before shipping. The instructions are good, I suggesting following them. The tape provided has a little tab that makes it easy to peel and stick. Perfect fit for older aquarium's with thicker center piece and sides.
- inTank Filtration Cover for Waterbox Cube 15 and Waterbox Peninsula Mini 25
- Fits Waterbox CUBE 15 and Waterbox Peninsula Mini 25. Hides filtration equipment. Hides equipment cords. Completes your aquarium by providing a custom look
- Rear of cover is open so cords can be routed without being seen. Top, sides and front are covered
- Black in color to blend into the aquarium. Easy to clean and install. Sits onto pf the rear area and locks into glass walls
- Knockout area can be removed without tools for use with a lighting goose neck or mounting bracket. Cover also features knockouts for a cord and to use the inTank AIO Surface Skimmer
- Made in the USA - CNC laser cut and precision bending assembly method from a single piece
- Manufacture: inTank
- Product Dimensions: 15.25 x 3.75 x 3.6 inches; 12.8 Ounces
- Editor's Impressions Of The inTank WB20CV
- Quality [star rating='4.7']
- Value For Money [star rating='3.9']
- Affordability [star rating='4.8']
inTank WB20CV Final Thoughts
"The fit, the look."Other than that, it was really easy to put together and set up. The lighting had failed in my 55 gal aquarium. The instructions are good, I suggesting following them. I got the package within a couple of days, much sooner than I expected. WE are very happy with these glass covers. The design is very low profile which I like a lot. I bought this for my 55 gallon tank that has no divider, thinking it would work.
Overall Score
4.0
(2 Points)

7. inTank Filtration Cover for Innovative Marine Fusion & Pro 10 | Innovative Marine Fusion Peninsula 1...
inTank IM10CV First Impressions
"Well done, sellers!"Long story short, I got rid of Dolce and Gabbana. Because it comes with the handles unattached so you can place them where you want. I'm hopeful that I can trim the glass down with some emery cloth. It has a feeding hole and holes for the cables and filter. The tape provided has a little tab that makes it easy to peel and stick. I went through many reviews before buying this lid. OMG it fits perfectly and make my tank look more vivid& beautiful.
- inTank Filtration Cover for Innovative Marine Fusion & Pro 10 | Innovative Marine Fusion Peninsula 14 | Innovative Marine Fusion Peninsula 20
- HIDES filtration equipment, equipment cords and DAMPENS noise. Fits Innovative Marine Fusion 10 and Peninsula 14 & 20
- Installs with the Innovative Marine stock mesh screen kit. Rear of cover is open so cords can be routed without being seen. Top, sides and front are covered
- Black in color to blend into the aquarium. Made of ultra strong and durable ABS plastic. Completes your aquarium by providing a custom look
- Easy to clean and install. Sits onto of the rear area and locks into glass walls. Knockout area can be removed without tools for use with a lighting goose neck or mounting bracket. ADDITIONAL knockout(s) can be easily cut with a nipper or snips.
- Cover also features knockouts for cords and to use the inTank AIO Surface Skimmer. Made in the USA - CNC laser cut and precision bending assembly method from a single piece using tab technology
- Manufacture: inTank
- Product Dimensions: 11.25 x 3.6 x 2.5 inches; 8.82 Ounces
- Editor's Impressions Of The inTank IM10CV
- Quality [star rating='5']
- Value For Money [star rating='4.4']
- Affordability [star rating='5']
inTank IM10CV Final Thoughts
"This will help immensely!"THERE ARE NO REPLACEMENT LIGHTS AVAILABLE. People complaining about fit probably didn't pat attention to the description. I decided to introduce two Black Oscars into my tank. I wasn't absolutely certain that they'd fit. Bought one for a 10 gal Tetra aquarium. EVEN DOWN TO THE TWO SIDED TAPE THAT HOLD THE HANDLES TO THE LIP TOP! I decided to introduce two Black Oscars into my tank.
Overall Score
5.0
(1 Points)

8. inTank Filtration Cover for Innovataive Marine Fusion 20 and Lagoon 25
inTank IM20CV First Impressions
"The light was included."I ordered this canopy for my planted tank to cut down on evaporation. IF YOU BUY THIS HOOD BE SURE TO SEAL WITH SILICON WHERE WIRES GO TO INTO LIGHT GROUP. The hooks for the back were an added bonus. I'm really happy with how this turned out. Some of the reviews I read were quite unclear. Fit my 75 gallon All Glass aquarium with split covers perfectly. I previously had a tank hood that took the long florescent bulbs.
- inTank Filtration Cover for Innovataive Marine Fusion 20 and Lagoon 25
- HIDES filtration equipment, equipment cords and DAMPENS noise. Fits Innovative Marine Fusion 20 and Lagoon 25. Installs over the Innovative Marine screen kit
- Rear of cover is open so cords can be routed without being seen. Top, sides and front are covered
- Black in color to blend into the aquarium. Made of ultra strong and durable ABS plastic. Completes your aquarium by providing a custom look
- Easy to clean and install. Sits onto of the rear area and locks into glass walls. Knockout area can be removed without tools for use with a lighting goose neck or mounting bracket. ADDITIONAL knockout(s) can be easily cut with a nipper or snips.
- Cover also features knockouts for cords and to use the inTank AIO Surface Skimmer. Made in the USA - CNC laser cut and precision bending assembly method from a single piece using tab technology
- Manufacture: inTank
- Product Dimensions: 23.1 x 3.5 x 3.75 inches; 1.2 Pounds
- Editor's Impressions Of The inTank IM20CV
- Quality [star rating='3.7']
- Value For Money [star rating='4.3']
- Affordability [star rating='4.8']
inTank IM20CV Final Thoughts
"Everything."My old hood was cracked and in desperate need of replacing. They provide extra handles just in case which is nice. I almost thought they shipped me the wrong item haha. The lighting had failed in my 55 gal aquarium. Only odd thing is that the plastic back is not full width. Fit my 75 gallon All Glass aquarium with split covers perfectly. Def a good purchase if you are looking for a affordable 55 gallon glass lid.
Overall Score
4.0
(1 Points)

Here Are Some Other Related Aquarium Hoods
9. Perfecto Manufacturing APF75205 Marineland Fluorescent Recessed Full Lighting Hoods for Aquarium, 20...
User Ratings: 61 11
Perfecto 308832 First Impressions
"I'm very pleased."Don't know about their longevity though. Yet another reason why I hate Top Fin. I am quite happy with the product otherwise. It was a hassle to open to feed the fish as well as to clean. The tape provided has a little tab that makes it easy to peel and stick. I bought this hood to replace the glass ones I had. New handles work amazing as expected and my tank looks great.
- Perfecto Manufacturing APF75205 Marineland Fluorescent Recessed Full Lighting Hoods for Aquarium, 20-Inch, Black
- Recessed Full Hood. Miscellaneous Aquarium
- Manufacturer: PERFECTO MANUFACTURING
- Manufacturer part number: 75205
- Manufacture: TopDawg Pet Supply
- Item Weight: 0.32 ounces
- Product Dimensions: 20 x 10.5 x 3.5 inches
- Editor's Impressions Of The Perfecto 308832
- Quality [star rating='4.9']
- Value For Money [star rating='5']
- Affordability [star rating='4.3']
Perfecto 308832 Final Thoughts
"Pleased with purchase!"Now, getting to what I know you are all reading this review for- the new tank lids. It installed easily and looks great. 2 packages of 2 stick on handles for the lids were included. Very shortly after I placed my order, I got a call from the seller. EXCELLENT CUSTOMER SERVICE AND EXCELLENT PRODUCT! ITS UP TO YOU TO GET YOUR MEASURMENTS RIGHT. The company was super fast with their shipping and really great customer service.
Overall Score
4.2
(26 Points)

10. Deep Blue Professional ADB42020 8-watt Deluxe Aquarium Hood, 20-Inch
User Ratings: 51
Deep Blue Professional 894273 First Impressions
"Fit my tank perfectly."You have to assemble the LED lights to the hood yourself. They murdered almost every fish in my tank. Other than that, it was really easy to put together and set up. I'm wondering if I could just be sent the other plastic piece I'm missing. Some of the reviews I read were quite unclear. It's nothing major just something to know if you have a stupid fish like me lol. I wasn't absolutely certain that they'd fit.
- Deep Blue Professional ADB42020 8-watt Deluxe Aquarium Hood, 20-Inch
- With Deep Blue Professional you can have the benefit of aquariums and accessories with the features you want at prices you can afford
- Manufactured by Deep blue professional
- Made in United States
- Manufacture: TopDawg Pet Supply
- Product Dimensions: 1 x 1 x 1 inches; 1 Pounds
- Editor's Impressions Of The Deep Blue Professional 894273
- Quality [star rating='3.5']
- Value For Money [star rating='4.2']
- Affordability [star rating='3.2']
Deep Blue Professional 894273 Final Thoughts
"The light is very bright."So I re-measured, and told him that my tank was 12. When I first picked up the package, it was really light. Sitting on the couch you can barely tell there's a hood on the tank. Then he texted me to let me know when my order was shipped. Had a small issue with the handles. This is a perfect fit for a 75gallon aquarium I bought used. I'm so glad I finally ordered this top for my fish tank.
Overall Score
4.0
(3 Points)
