Editor's Choice - Our Favorite LED Aquarium Hoods

1. Tetra LED Aquarium Hood, Low Profile, Energy Efficient Hood with Lighting

User Ratings: 71 4

Tetra NV33149 First Impressions

"The packaging is amazing."

It's a little difficult to put on but it does snatch into place. That tank hood went bad after only a year. Aside from these complaints I am very happy so I give it 4 stars. This is a perfect fit for a 75gallon aquarium I bought used. I am quite happy with the product otherwise. The plastic pieces to break out for the filter and such are perfect for my needs. Dont blame manufacturer if you can read a ruler.

  • Tetra LED Aquarium Hood, Low Profile, Energy Efficient Hood with Lighting
  • aquarium HOOD WITH LEDS: Low-profile, hinged hood houses white LED lights that create a natural underwater shimmer effect.
  • ENERGY EFFICIENT: Built-in LEDs – no bulbs to replace.
  • FILTER COMPATIBLE: Cutouts in the back of the hood can accommodate a variety of filters.
  • RANGE OF SIZES: Tetra LED Hoods are available in multiple sizes to accommodate most rectangular tanks.
  • SIZE: Measures 24 inches wide by 12 inches deep.
  • Manufacture: Tetra
  • Product Dimensions: 24 x 12 x 2.5 inches; 1 Pounds
  • Editor's Impressions Of The Tetra NV33149
  • Quality
  • Value For Money
  • Affordability

Tetra NV33149 Final Thoughts

"The lid looks very nice."

Other than that, it was really easy to put together and set up. The space in the back fits my heater and filter perfectly. Dont blame manufacturer if you can read a ruler. EVEN DOWN TO THE TWO SIDED TAPE THAT HOLD THE HANDLES TO THE LIP TOP! We were not able to get the covers on without lubricating them first. Some of the reviews I read were quite unclear. I bought this hood to replace the glass ones I had.

Overall Score
4.5


(2154 Points)

Peoples Choice - Other Highly Rated LED Aquarium Hoods

2. Aqueon LED Background Hood

User Ratings: 77 4

Aqueon 821108 First Impressions

"I love it!"

As a short individual I did find the edges a little sharp. Which living in the countryside makes these a hard to find item. Aquariums are less standard than you might think. You do have to put the LED's in yourself but it is super super easy. They provide extra handles just in case which is nice. I have a hanging filter across the back on one side. The knockouts aren't to difficult, I used needle nose pliers and snapped really easy.

  • Aqueon LED Background Hood
  • 36 inch Aqueon LED Deluxe Full Hood for use over glass covered aquariums
  • Designed to tightly fit inside fish tank rim with a full length feeding door
  • Moon glow accent light and three-way power switch included
  • Changing LED lamps are easy to snap in and out, plug and play
  • Comes with one Day White LED lamp, with slot for an additional LED lamp: Day White, Colormax, Beauty Max or Max Blue
  • Manufacture: Pro-Motion Distributing - Direct
  • Product Dimensions: 36 x 2.5 x 9.63 inches; 1 Pounds
  • Editor's Impressions Of The Aqueon 821108
  • Quality
  • Value For Money
  • Affordability

Aqueon 821108 Final Thoughts

"I am so proud."

That tank hood went bad after only a year. It was a hassle to open to feed the fish as well as to clean. I'm really happy with how this turned out. I mean it's the same brand and says it's for our size tank. When I would attempt to feed them, these monsters would JUMP out of the tank. Had a small issue with the handles. I have a hanging filter across the back on one side.

Overall Score
4.6


(671 Points)

3. Juwel Rio 300 Flap Set

User Ratings: 79 3

Juwel 93985 First Impressions

"They were mean."

Even at petco that sold me the tank. When I would attempt to feed them, these monsters would JUMP out of the tank. ITS UP TO YOU TO GET YOUR MEASURMENTS RIGHT. I bought this hood to replace the glass ones I had. Nice that the seller called to ensure a good fit before shipping. I'm hopeful that I can trim the glass down with some emery cloth. The glass and the plastic hinge form a tight fit that is difficult to get together.

  • Juwel Rio 300 Flap Set
  • Zipper closure
  • Wipe clean
  • The lid has been adapted for the valves in your Juwel fish tank.
  • The pre-drilled holes allow you to easily use a Juwel automatic dispenser, as well as the Juwel Skimmer 3.13.
  • Manufacture: Juwel
  • Product Dimensions: 10.24 x 48.03 x 0.39 inches; 3.46 Pounds
  • Editor's Impressions Of The Juwel 93985
  • Quality
  • Value For Money
  • Affordability

Juwel 93985 Final Thoughts

"I have a happy fish now."

Very shortly after I placed my order, I got a call from the seller. Perfect fit for older aquarium's with thicker center piece and sides. So far very pleased with my purchase. They fit our 90 gallon tank perfectly. Perfect fit for older aquarium's with thicker center piece and sides. I like that there's a double opening and that the pop outs are easy to remove. The lighting had failed in my 55 gal aquarium.

Overall Score
4.6


(30 Points)

4. inTank Fish Saver Guard for Oceanic BioCube 29 and Oceanic BioCube HQI

User Ratings: 76 7

inTank First Impressions

"My other one is clear."

I would order this again in a heartbeat. I have an Aqueon QuietFlow 30 and it fit just fine. We were not able to get the covers on without lubricating them first. Long story short, I got rid of Dolce and Gabbana. I think a tank could have rolled over the box and the glass wouldn't have cracked! He introduced himself and then confirmed my order. I bought this tank hood and I have never been happier.

  • inTank Fish Saver Guard for Oceanic BioCube 29 and Oceanic BioCube HQI
  • Fits Oceanic BioCube 29 and Oceanic BioCube 29 HQI with a lower false wall
  • Made of high quality acrylic. Features two clips for an easy install over the false wall
  • Black color hides from view. Top piece provides and extra layer of protection from the pesky jumpers
  • Does not hinder access to the chamber areas or other equipment, in most cases once installed it never needs to be removed
  • Features notches cut into the sides to you can route power cords to the rear of the aquarium
  • Manufacture: inTank
  • Product Dimensions: 18 x 3 x 3 inches; 13.6 Ounces
  • Editor's Impressions Of The inTank
  • Quality
  • Value For Money
  • Affordability

inTank Final Thoughts

"Well worth the price."

Aside from these complaints I am very happy so I give it 4 stars. Overall everything came intact and its working so I'm satisfied. I got the package within a couple of days, much sooner than I expected. Aside from these complaints I am very happy so I give it 4 stars. You do have to put the LED's in yourself but it is super super easy. So I re-measured, and told him that my tank was 12. I'm so glad I finally ordered this top for my fish tank.

Overall Score
4.4


(17 Points)

Honorable Mentions - More Top Selling LED Aquarium Hoods

5. inTank Filtration Cover for Red Sea Max 130 | Red Sea Max 130D | Red Sea Max C-130

User Ratings: 67 17

inTank First Impressions

"Hey, they made it!"

It installed easily and looks great. People complaining about fit probably didn't pat attention to the description. I AM NOT HAPPY WITH QUALITY OF PRODUCT NOR WITH LACK OF REPLACEMENT LIGHTS. Because it comes with the handles unattached so you can place them where you want. MIGHT DO YOU GOOD TO CHOOSE ANOTHER BRAND. We have a pretty quiet household though, so nobody will be knocking it off. I'm really happy with how this turned out.

  • inTank Filtration Cover for Red Sea Max 130 | Red Sea Max 130D | Red Sea Max C-130
  • Hides filtration equipment after you remove the hood. Hides equipment cords. Back is open so cords can be routed without being seen
  • Updated design - Made from one piece heat bent and secured using tab technology. Textured outer side
  • Easy to clean and install. It sits on top of your aquarium's rear area. Black in color to blend in with your existing moldings
  • Works with EcoTech RMS LED mounting bracket and others. Dampens sound.
  • Fits Red Sea Max 130. Fits Red Sea Max 130D. Fits Red Sea Max C-130
  • Manufacture: inTank
  • Product Dimensions: 23 x 4.55 x 3.25 inches
  • Editor's Impressions Of The inTank
  • Quality
  • Value For Money
  • Affordability

inTank Final Thoughts

"High quality."

I figured, it's perfect, it has to fit. We were not able to get the covers on without lubricating them first. Aside from these complaints I am very happy so I give it 4 stars. It has a feeding hole and holes for the cables and filter. The hooks for the back were an added bonus. Other than that, it was really easy to put together and set up. It looks sooooooo much nicer than the bulky old black top I had.

Overall Score
4.2


(7 Points)

6. inTank Fish Saver Guard for Oceanic BioCube 14

inTank First Impressions

"I love it!"

Sitting on the couch you can barely tell there's a hood on the tank. THERE ARE NO REPLACEMENT LIGHTS AVAILABLE. I am very happy with this purchase! Words cannot explain how much I adore this! When I first picked up the package, it was really light. They murdered almost every fish in my tank. When I would attempt to feed them, these monsters would JUMP out of the tank.

  • inTank Fish Saver Guard for Oceanic BioCube 14
  • Fits Oceanic BioCube 14 aquarium. Helps prevent fish from entering the rear chambers
  • Made of high quality acrylic. Features a locking clip for an easy install that keeps the Fish Saver against the false wall
  • Black color hides from view. Fish Saver provides a layer of protection from the pesky jumpers
  • Does not hinder access to the chamber areas or other equipment, in most cases once installed it never needs to be removed
  • Features one notch cut into the side so you can route a power cord to the rear of the aquarium
  • Manufacture: inTank
  • Product Dimensions: 13 x 1 x 3 inches; 4.8 Ounces
  • Editor's Impressions Of The inTank
  • Quality
  • Value For Money
  • Affordability

inTank Final Thoughts

"3 switch positions."

I mean it's the same brand and says it's for our size tank. We have a pretty quiet household though, so nobody will be knocking it off. Other than that, it was really easy to put together and set up. The plastic pieces to break out for the filter and such are perfect for my needs. I thought of putting some hot silicone to prevent this, but never got to do it. THERE ARE NO REPLACEMENT LIGHTS AVAILABLE. So I re-measured, and told him that my tank was 12.

Overall Score
5.0


(2 Points)

7. All Glass Aquarium AAG29607 Versa Top, 72bf

User Ratings: 74 12

All Glass Aquariums 15905296076 First Impressions

"The packaging is amazing."

Because it comes with the handles unattached so you can place them where you want. I think a tank could have rolled over the box and the glass wouldn't have cracked! Dont blame manufacturer if you can read a ruler. I have an Aqueon QuietFlow 30 and it fit just fine. OMG it fits perfectly and make my tank look more vivid& beautiful. I'm hopeful that I can trim the glass down with some emery cloth. Now, getting to what I know you are all reading this review for- the new tank lids.

  • All Glass Aquarium AAG29607 Versa Top, 72bf
  • Our glass tops are perfect for reducing evaporation and keeping fish from jumping out of your aquarium
  • Each Versa-Top features a clear vinyl back strip that can be easily cut to custom fit your accessories
  • Special store use Versa-Tops feature heavy 3/16 glass with notched Corners for air lines and larger glass sections that allow easier
  • Our glass tops are perfect for reducing evaporation and keeping fish from jumping out of your aquarium
  • Each Versa-Top features a clear vinyl back strip that can be easily cut to custom fit your accessories
  • Special store use Versa-Tops feature heavy 3/16 glass with notched Corners for air lines and larger glass sections that allow easier
  • Our glass tops are perfect for reducing evaporation and keeping fish from jumping out of your aquarium
  • Each Versa-Top features a clear vinyl back strip that can be easily cut to custom fit your accessories
  • Manufacture: Allen's Bookshop
  • Product Dimensions: 24.2 x 7.7 x 2.2 inches; 2 Pounds
  • Editor's Impressions Of The All Glass Aquariums 15905296076
  • Quality
  • Value For Money
  • Affordability

All Glass Aquariums 15905296076 Final Thoughts

"This will help immensely!"

I have a hanging filter across the back on one side. Then he texted me to let me know when my order was shipped. THERE ARE NO REPLACEMENT LIGHTS AVAILABLE. When I would attempt to feed them, these monsters would JUMP out of the tank. Mine slid right on with no problem so that might be an issue that they have fixed. Aside from these complaints I am very happy so I give it 4 stars. They provide extra handles just in case which is nice.

Overall Score
4.3


(117 Points)

8. All Glass Aquarium AAG29202 Versa Top, 12-Inch

User Ratings: 67 9

All Glass Aquariums 15905292023 First Impressions

"Lights up my 5."

It fit the 55gallon tank without an issue. IF YOU BUY THIS HOOD BE SURE TO SEAL WITH SILICON WHERE WIRES GO TO INTO LIGHT GROUP. When I first picked up the package, it was really light. They fit our 90 gallon tank perfectly. When I would attempt to feed them, these monsters would JUMP out of the tank. 2 packages of 2 stick on handles for the lids were included. You do have to put the LED's in yourself but it is super super easy.

  • All Glass Aquarium AAG29202 Versa Top, 12-Inch
  • Our glass tops are perfect for reducing evaporation and keeping fish from jumping out of your aquarium.
  • Each Versa-Top features a clear vinyl back strip that can be easily cut to custom fit your accessories.
  • Special store use Versa-Tops feature heavy 3/16 glass with notched Corners for air lines and larger glass sections that allow easier
  • Our glass tops are perfect for reducing evaporation and keeping fish from jumping out of your aquarium
  • Each Versa-Top features a clear vinyl back strip that can be easily cut to custom fit your accessories
  • Special store use Versa-Tops feature heavy 3/16 glass with notched Corners for air lines and larger glass sections that allow easier
  • Our glass tops are perfect for reducing evaporation and keeping fish from jumping out of your aquarium
  • Each Versa-Top features a clear vinyl back strip that can be easily cut to custom fit your accessories
  • Manufacture: Allen's Bookshop
  • Product Dimensions: 17 x 12.1 x 6.3 inches; 13.76 Ounces
  • Editor's Impressions Of The All Glass Aquariums 15905292023
  • Quality
  • Value For Money
  • Affordability

All Glass Aquariums 15905292023 Final Thoughts

"Thanks a lot."

When I purchased these glass covers, I did it with my fingers crossed. It fit the 55gallon tank without an issue. Now, getting to what I know you are all reading this review for- the new tank lids. They didnt cut me but they did have a painful feel to them. They dont have any borders on them to make handling easier. Dont blame manufacturer if you can read a ruler. Nice that the seller called to ensure a good fit before shipping.

Overall Score
4.2


(328 Points)

9. Tetra LED Aquarium Hood, Low Profile, Energy Efficient Hood with Lighting

User Ratings: 71 4

Tetra NV33149 First Impressions

"The packaging is amazing."

It's a little difficult to put on but it does snatch into place. That tank hood went bad after only a year. Aside from these complaints I am very happy so I give it 4 stars. This is a perfect fit for a 75gallon aquarium I bought used. I am quite happy with the product otherwise. The plastic pieces to break out for the filter and such are perfect for my needs. Dont blame manufacturer if you can read a ruler.

  • Tetra LED Aquarium Hood, Low Profile, Energy Efficient Hood with Lighting
  • aquarium HOOD WITH LEDS: Low-profile, hinged hood houses white LED lights that create a natural underwater shimmer effect.
  • ENERGY EFFICIENT: Built-in LEDs – no bulbs to replace.
  • FILTER COMPATIBLE: Cutouts in the back of the hood can accommodate a variety of filters.
  • RANGE OF SIZES: Tetra LED Hoods are available in multiple sizes to accommodate most rectangular tanks.
  • SIZE: Measures 24 inches wide by 12 inches deep.
  • Manufacture: Tetra
  • Product Dimensions: 24 x 12 x 2.5 inches; 1 Pounds
  • Editor's Impressions Of The Tetra NV33149
  • Quality
  • Value For Money
  • Affordability

Tetra NV33149 Final Thoughts

"The lid looks very nice."

Other than that, it was really easy to put together and set up. The space in the back fits my heater and filter perfectly. Dont blame manufacturer if you can read a ruler. EVEN DOWN TO THE TWO SIDED TAPE THAT HOLD THE HANDLES TO THE LIP TOP! We were not able to get the covers on without lubricating them first. Some of the reviews I read were quite unclear. I bought this hood to replace the glass ones I had.

Overall Score
4.5


(2154 Points)

10. Juwel Support Strap For Vision 260

User Ratings: 29

Juwel 54388/4005 First Impressions

"So far they're sticking."

Had several cutouts to fit different size filters, heaters, etc. You have to assemble the LED lights to the hood yourself. My old hood was cracked and in desperate need of replacing. Unlike others on Amazon, this is real tempered glass and very strong. I am very happy I didn't list to the nay sayers! I would order this again in a heartbeat. I got the package within a couple of days, much sooner than I expected.

  • Juwel Support Strap For Vision 260
  • Wipe clean
  • Replacement support strap.
  • Fits the Vision 260.
  • Manufacture: Juwel
  • Editor's Impressions Of The Juwel 54388/4005
  • Quality
  • Value For Money
  • Affordability

Juwel 54388/4005 Final Thoughts

"So, I bought it."

It doesn't have a recessed area to help avoid movement. EVEN DOWN TO THE TWO SIDED TAPE THAT HOLD THE HANDLES TO THE LIP TOP! Aquariums are less standard than you might think. I am very happy I didn't list to the nay sayers! They fit perfectly on my tank, pretty thick glass& the handles attach easily. They didnt cut me but they did have a painful feel to them. It installed easily and looks great.

Overall Score
4.3


(2 Points)

Copyright © 2021 Rob Aquatics — Primer Child WordPress theme by GoDaddy