Editor's Choice - Our Favorite AquaTop Fish Breeding Tanks

1. AquaTop ATP Plnt Anchors 10pc

AquaTop PA-10 First Impressions

"Good product."

I will update after the babies are born but so far this is great. We have 12 babies swimming around in our tank at the moment. The net is harder to see through but not for the casual observer. This is my first breeder box so I cant really compare with other brands. My husband got me a few guppies that apparently had been pregnant. The suction cups were adequate and held the breeder on to the glass fairly well. Not sure why some people are complaining the the separating tray floats.

  • AquaTop ATP Plnt Anchors 10pc
  • Keep live or artificial aquarium Plants in place
  • Safe & non-toxic to fish
  • For freshwater use only
  • Length 3.15"
  • 10-Pack
  • Manufacture: Aquatop
  • Product Dimensions: 7 x 5 x 2 inches; 2.12 Ounces
  • Editor's Impressions Of The AquaTop PA-10
  • Quality
  • Value For Money
  • Affordability

AquaTop PA-10 Final Thoughts

"Works really well."

My other one was fine but I brought her out so she wouldn't get hurt. Instead of catching babies, I simply leave the mom in the top piece. We have 12 babies swimming around in our tank at the moment. I took out the part that separates the parent from the babies. It's plastic but I have used it for several months and it’s help up well. I took the out of the tank and put them in mugs but it was not practical. If you have a smaller tank, the Lee's may be the better choice.

Overall Score
5.0


(1 Points)

2. POPETPOP Fish Breeding Box - Acrylic Fish Isolation Box Aquarium Hatchery Incubator with Suction Cup...

User Ratings: 44 16

POPETPOP 20FQPE14PB1955G83YB7 First Impressions

"Priced right."

I have two female Bettas and a Pleco in a filtered, heated 15-gallon tank. There are slats in the bottom for the babies to escape to, to keep from being eaten. Both are designed for free floating. That way the water still flows nicely in where mom is. Kind of a pain to remove the lid and feed the fry. I usually wait to write reviews but I am already impressed with this breeding box. The lid doesn't lock in place too snugly which make it easy to open.

  • POPETPOP Fish Breeding Box - Acrylic Fish Isolation Box Aquarium Hatchery Incubator with Suction Cups for Baby Fishes Shrimp Guppy Clownfish Aggressive Fish
  • Size & Material - 11.5" x 5.9" x 6.1"/ 29 x 15 x 15.5 cm. This fish breeding box is made of transparent acrylic, safe and secure tank for breeding, isolating or acclimating fish. You can clearly observe inside condition.
  • Must-have for Pregnant Fishes - Two isolated rooms for isolating and protecting small fishes, pregnant fishes and newborn fishes. Fish eggs will drop to the bottom of the room, no attack from other fishes, which improves survival rates of newborn fishes.
  • Multi-purpose Use - The fish isolation box can reduce danger, suitable for isolating diseased and weakened fishes. It also can protect sick fishes, small fishes or shrimps from aggressive large fishes.
  • With suction cup and hanging hook, this tank can be installed by two ways, and the height is adjustable. It's easy to install in the place of fish tank where you want. (First time you should remove protection layers from acrylic fish breeding box.)
  • Notice - We provide a 100% satisfaction Promise and quality customer service, no purchase risk. If you have any questions during using, please feel free to contact us, we will help you solve your problem in time.
  • Manufacture: POPETPOP
  • Item Weight: 1.71 pounds
  • Product Dimensions: 11.42 x 5.91 x 6.1 inches
  • Editor's Impressions Of The POPETPOP 20FQPE14PB1955G83YB7
  • Quality
  • Value For Money
  • Affordability

POPETPOP 20FQPE14PB1955G83YB7 Final Thoughts

"Great design."

I rated this 4 because it works great for the babies to live in for a bit. In the picture, the Petzilla Aquarium Fish Breeder box is on the right. I'm using it as a nursery for baby guppies. My husband got me a few guppies that apparently had been pregnant. Not sure why some people are complaining the the separating tray floats. Easily accommodates two Molly's, swords or platy fish. We have 12 babies swimming around in our tank at the moment.

Overall Score
3.7


(62 Points)

3. Baoblaze Assorted Aquarium Stainless Steel CO2 Diffuser Carbon Dioxide Bubble Reactor

Baoblaze First Impressions

"It's nice an big."

This keeps her area better airated and actually helps flow the babies out. I never knew how important this was until tank cleaning time! The dividers only work with the fry drop in place. You have to be really careful with shrimp or they die. I own 7 of these isolation, breeding tanks. We have 12 babies swimming around in our tank at the moment. Guppy fry didn't escape and they look happy.

  • Baoblaze Assorted Aquarium Stainless Steel CO2 Diffuser Carbon Dioxide Bubble Reactor
  • High-grade polished stainless steel CO2 diffuser, durable as well as elegant, adding a beautiful scenery to your aquarium.
  • 2 sizes bottom diameter: 3.6cm/1.41" and 2.4cm/0.94", 5 length available (20cm/7.87", 25cm/9.8", 30cm/11.8", 35cm/13.8", 40cm/15.7") to satisfy your needs.
  • Helps to ensure plants receive proper amounts of CO2, improve the growth and health of your plants with sufficient CO2 supply.
  • The CO2 diffuser disc must be screwed as tight as possible when installation.
  • Notice: The CO2 diffuser may release big CO2 bubbles during its first 1-3 days of usage. When ceramic disc becomes saturated with water, it will then release fine CO2 bubbles, this is normal and may take up to 3 days.
  • Manufacture: Baoblaze
  • Editor's Impressions Of The Baoblaze
  • Quality
  • Value For Money
  • Affordability

Baoblaze Final Thoughts

"Works really well."

Future design improvement- less room for fry, more room for moms. With the pump it's completely circulated and levels are normal. I actually put it in my 10 gallon baby fry tank. My other one was fine but I brought her out so she wouldn't get hurt. 5 gallon, but he was struggling to swim. I own 7 of these isolation, breeding tanks. She doesn't seem very stressed, honestly, and likes to nap in the V's.

Overall Score
5.0


(1 Points)

4. Anself Fish Breeding Incubator Net Hanging Fry Baby Fish Hatchery Isolation Box Aquarium Accessory L...

User Ratings: 24

Anself H15732XL-F First Impressions

"No, really, I'm kidding."

With the fry drop in you have plenty of room for temporarily keeping the females. With the pump it's completely circulated and levels are normal. This is the best floating breeder I have ever tried. Guppy fry didn't escape and they look happy. We had 2 pregnant fish in seperate halves with them seperated. Easily accommodates two Molly's, swords or platy fish. I ordered this and it came next day.

  • Anself Fish Breeding Incubator Net Hanging Fry Baby Fish Hatchery Isolation Box Aquarium Accessory L
  • Manufacture: Anself
  • Editor's Impressions Of The Anself H15732XL-F
  • Quality
  • Value For Money
  • Affordability

Anself H15732XL-F Final Thoughts

"Thank you so much!"

I really liked the fact I could add an airline for water flow. I feel like this breeder box is sturdier than some others that I've used. The funnel tray is placed too high within the box. It comes with 2 suction cups for when you want it to stay in place. I bought one to try it out, and it's been excellent. I don't see how they send used stuff out as new! I feel like this breeder box is sturdier than some others that I've used.

Overall Score
3.5


(9 Points)

5. Fine Net Aquarium Breeder & Isolation Tank - Double Chamber

Aquarium H20 First Impressions

"A good purchase for."

Future design improvement- less room for fry, more room for moms. Good quality and easy to take apart. Now he's chilling in quarantine until he heals. I never knew how important this was until tank cleaning time! I own 7 of these isolation, breeding tanks. I ordered this and it came next day. I didn't have the space for an external one.

  • Fine Net Aquarium Breeder & Isolation Tank - Double Chamber
  • Size is 10.5'' x 6'' x 6''
  • Ideal for sick or breeding fish
  • Soft Fine White Mesh
  • Suction cup supports
  • Double chamber
  • Manufacture: Aquarium H20
  • Editor's Impressions Of The Aquarium H20
  • Quality
  • Value For Money
  • Affordability

Aquarium H20 Final Thoughts

"Thank you so much!"

I put the rainbar into it so now they can't escape. Apparently my purple Betta, Dragonfruit, did not get the memo. I will definitely buy these kind of breeder again. I never knew how important this was until tank cleaning time! This is the best floating breeder I have ever tried. The babies are now in the box without the middle divider piece. Neither ended up having their babies in the breeder box.

Overall Score
3.0


(1 Points)

6. Reefing Art Small Magnetic Acclimation Breeder Box Anemone Coral Strong N52 Magnets for 1/2" Glass

User Ratings: 56 10

Reefing Art First Impressions

"Great product."

So overall, this is a functioning product with little issues. Petzilla is larger in size which reduces crowding as the babies grow. It's roomy and gives them space to move around. In the picture, the Petzilla Aquarium Fish Breeder box is on the right. I got this so I can just put him in our 20-gallon hex with the angelfish. It would have been nice to have the suction cups. The baby fish were able to swim from the bottom back to the time in the corners.

  • Reefing Art Small Magnetic Acclimation Breeder Box Anemone Coral Strong N52 Magnets for 1/2" Glass
  • Size: 4.5" ( 12cm) cube for small live stock
  • High quality cell cast acrylic. Strong waterproof sealed magnets, recommend for 1/2" thick glass aquarium
  • Video instruction available, for easy 3 mins assembly / disassembly for cleaning. (First time may take about 10 mins to remove protection layers from acrylic)
  • Holding & Displaying fish / coral / anemones / inverts. Can also be used as in tank refugium, media basket, etc.
  • Manufacture: Reefing Art
  • Editor's Impressions Of The Reefing Art
  • Quality
  • Value For Money
  • Affordability

Reefing Art Final Thoughts

"Easy to install."

I really liked the fact I could add an airline for water flow. I will definitely buy these kind of breeder again. I got the medium and it's mostly the width of a 10 gallon tank. I've used several other floating breeders, and have always wished they were larger. Fits nicely in a size 10 gallon tank. Not sure why some people are complaining the the separating tray floats. With the fry drop removed you get a really nice size little tank.

Overall Score
4.1


(31 Points)

7. uxcell Plastic Aquarium Fish Tank Frame Hatchery Separation Isolation 4 Suction Cups Mesh Net Breede...

uxcell a16121400ux0682 First Impressions

"Works good."

Super strong suction cups- I have both the small and large. I use this all the time for fish or new plants. The lid doesn't lock in place too snugly which make it easy to open. I have used other breeder boxes and like this one the best. I own 7 of these isolation, breeding tanks. I'm using it as a nursery for baby guppies. Guppy fry didn't escape and they look happy.

  • uxcell Plastic Aquarium Fish Tank Frame Hatchery Separation Isolation 4 Suction Cups Mesh Net Breeder Divider White
  • Color: White; Package Content: 1 x Breeding Net,4 x Suction Cups
  • Product Name: Aquarium Net Breeder; Material: Plastic,Nylon,Rubber
  • Total Size: 15.8 x 14 x 15.3cm/ 6.2'' x 5.5'' x 6''(L*W*H)
  • Suction Cup Dia: 2.6cm/ 1''
  • Net Weight: 60g
  • Manufacture: uxcell
  • Editor's Impressions Of The uxcell a16121400ux0682
  • Quality
  • Value For Money
  • Affordability

uxcell a16121400ux0682 Final Thoughts

"It was a great purchase!"

I have two female Bettas and a Pleco in a filtered, heated 15-gallon tank. Kind of a pain to remove the lid and feed the fry. We have 12 babies swimming around in our tank at the moment. The lid doesn't lock in place too snugly which make it easy to open. I didn't have the space for an external one. No more babies swimming back up the cracks and getten eaten by mom. Neither ended up having their babies in the breeder box.

Overall Score
5.0


(1 Points)

8. PIVBY Fish Breeder Box Fish Tank Isolation Divider Acrylic Aquarium Hatching Incubator for Fishes Sh...

User Ratings: 54 12

PIVBY First Impressions

"Glad I bought this."

It is large enough for fish bigger than guppies. 5 gallon, but he was struggling to swim. She doesn't seem very stressed, honestly, and likes to nap in the V's. So it IS possible for very small fry to slip through the slits. Worked well, water and air flow is minimum due to slots being very thin. I personally use these to introduce smaller fish into my community tanks. Not as sturdy as I thought but perfect for what I wanted.

  • PIVBY Fish Breeder Box Fish Tank Isolation Divider Acrylic Aquarium Hatching Incubator for Fishes Shrimp Clownfish Guppy
  • Made of safe Acrylic material,Safe and secure tank for breeding, isolating or acclimating fish,also it is easy to see your baby fish.The size it is 8x4x4 inch,Ideal as maturation tank for fry, or isolation tank for aggressive or injured fish.
  • Removable center divider allows two fish to be safely isolated.can reduce danger,suitable for isolating diseased,weakened,also can Separate aggressive fish, injured fish, small fish, shrimp, and other sea clownfish.
  • It is a Hatchery for viviparous fish, such as bettas, guppies, medaka, ect. It can Prevent attack from adult fish, improve the survival rate of juvenile fish
  • Space saving design that hangs on the inside of the aquarium.plastic ring designed to fix
  • Please remove the protection film before use.Suitable for freshwater and marine aquarium.There is excess plastic ring and screws
  • Manufacture: PIVBY
  • Editor's Impressions Of The PIVBY
  • Quality
  • Value For Money
  • Affordability

PIVBY Final Thoughts

"Clear plastic EZ to use."

It's unsightly with big uneven seams and extra fabric. Unlike the males, female Bettas should get along together. I took the out of the tank and put them in mugs but it was not practical. Not as sturdy as I thought but perfect for what I wanted. I left it out and the babies were sneaking out through that hole. I popped this together in a minute and it was in the tank in another minute. Both are designed for free floating.

Overall Score
3.9


(78 Points)

9. Fish Breeding Box, Aquarium Breeder Box Fish Baby Hatchery Incubator Isolation with Artificial Plant...

User Ratings: 60 6

Tfwadmx First Impressions

"Works ok for me."

It is large enough for fish bigger than guppies. My husband got me a few guppies that apparently had been pregnant. We picked this up to use as a secondary QT box for our reef tank. Good size and I like the separated chambers. With the fry drop in you have plenty of room for temporarily keeping the females. I will definitely buy these kind of breeder again. Guppy fry didn't escape and they look happy.

  • Fish Breeding Box, Aquarium Breeder Box Fish Baby Hatchery Incubator Isolation with Artificial Plant for Guppy
  • ✔PROTECT JUVENILE FISH -- Prevent the baby fish from the adult fish's attack and improve the survival rate of the baby fish. Perfect isolation for aggressive fish, injured fish, small fish, shrimp, clown fish, and other marine fishes.
  • ✔MULTIPLE-ROOM DESIGN -- Multiple rooms Designed Space can be divided into as much as 3 small “rooms” as needed. Remove all the partitions to work as a large hatchery box.
  • ✔EFFECTIVE ISOLATION -- 0.5mm Super-slim Isolation Gap Thinner than the gap of the fish eggs plate, effectively protect the baby fish from the invasion of the adult fish.
  • ✔STABLE WITHOUT FLOATING -- Original Design of 4 stands to Make It Steady The W funnel won't be floating because of the water pressure when it's not placed upright.
  • ✔NOTE -- Please be advised that the clear acrylic pieces come with a protective film on both sides. Please tear it off when you use it.
  • Manufacture: Tfwadmx
  • Item Weight: 14.4 ounces
  • Product Dimensions: 1 x 1 x 1 inches
  • Editor's Impressions Of The Tfwadmx
  • Quality
  • Value For Money
  • Affordability

Tfwadmx Final Thoughts

"This product is great."

The tube for the bubbler is a nice touch. They seemed scared at first but calmed down after about 30 minutes. The suction cups were adequate and held the breeder on to the glass fairly well. If that bottom piece fit better it would have been perfect. I really like the design of this breeder box. It's a decent size for an internal breeder box. The breeder box has a decent size for isolating fish or dwarf shrimp.

Overall Score
4.2


(91 Points)

10. Superfish Easy Breeding Box 1500g

User Ratings: 82

Superfish 545000 First Impressions

"I'm very pleased with it."

I took the out of the tank and put them in mugs but it was not practical. It is large enough for fish bigger than guppies. As with many plastics, if it isn't thick enough, then it can break. I got this so I can just put him in our 20-gallon hex with the angelfish. The lid doesn't lock in place too snugly which make it easy to open. This product is excellent, works fabulously. We had 2 pregnant fish in seperate halves with them seperated.

  • Superfish Easy Breeding Box 1500g
  • Manufacture: Superfish
  • Product Dimensions: 4.33 x 4.33 x 4.33 inches; 7.05 Ounces
  • Editor's Impressions Of The Superfish 545000
  • Quality
  • Value For Money
  • Affordability

Superfish 545000 Final Thoughts

"Mines in the mail ."

The Petzilla and Lee's make observations easier. Tired of my guppies eating their fry and found this. I never knew how important this was until tank cleaning time! I left it out and the babies were sneaking out through that hole. In the picture, the Petzilla Aquarium Fish Breeder box is on the right. We picked this up to use as a secondary QT box for our reef tank. I have used other breeder boxes and like this one the best.

Overall Score
4.7


(12 Points)

Copyright © 2022 Rob Aquatics — Primer Child WordPress theme by GoDaddy