Editor's Choice - Our Favorite Hamiledyi Fish Breeding Tanks

1. Cichlids Tumbler Fish Hatchery Incubator Eggs Aquarium Breeding Mouth-Brooding 40 MM

User Ratings: 60 8

Hamiledyi First Impressions

"Would highly recommend."

I currently have about 30 or so new babies in it. Fits nicely in a size 10 gallon tank. My kids observe the fish and write notes about health and behavior. It works as it is designed to do and kept my fry safe. I have used other breeder boxes and like this one the best. The net is harder to see through but not for the casual observer. I left it out and the babies were sneaking out through that hole.

  • Cichlids Tumbler Fish Hatchery Incubator Eggs Aquarium Breeding Mouth-Brooding 40 MM
  • Mouth-brooding is made of non-toxic plastic material. The hatching for raising fish eggs.
  • Suction tube clamp is soft, it is easy to install. not easy to scratch the incubator director.
  • Allows egg incubation in same tank as fish are breeding in to provide identical water conditions during incubation period.
  • Hatching fish eggs, you need to use the same fish tank water, so that fish eggs adapt to the environment
  • The purpose of an egg tumbler is to allow fresh water to circulate over cichlid eggs that have been separated from the parents,a fresh supply of clean water allows the eggs to develop in an oxygen rich environment.
  • Manufacture: Hamiledyi
  • Editor's Impressions Of The Hamiledyi
  • Quality [star rating='3.8']
  • Value For Money [star rating='4.8']
  • Affordability [star rating='3.2']

Hamiledyi Final Thoughts

"Great product!"

This keeps her area better airated and actually helps flow the babies out. It's unsightly with big uneven seams and extra fabric. I use this all the time for fish or new plants. I also has a lid with snaps in place and has 2 slotted circles for dropping food in. My other one was fine but I brought her out so she wouldn't get hurt. I have noticed that with all they pieces in that food does not exit the bottom half. It would have been nice to have the suction cups.

Overall Score
4.2

[star rating="4.2"]
(49 Points)

Peoples Choice - Other Highly Rated Hamiledyi Fish Breeding Tanks

2. Hamiledyi Aquarium Breeding Isolation Box Acrylic Fish Tank Acclimation Hatchery Incubator Holder Di...

User Ratings: 65

Hamiledyi First Impressions

"It is extremely small."

I have both the small and larger version. I don't see how they send used stuff out as new! I never knew how important this was until tank cleaning time! Good quality and easy to take apart. He had room to still swim around and I didn't feel too guilty. Instead of catching babies, I simply leave the mom in the top piece. The dimensions for the large size are approximately 8.

  • Hamiledyi Aquarium Breeding Isolation Box Acrylic Fish Tank Acclimation Hatchery Incubator Holder Divider for Fishes Shrimp Clownfish Guppy
  • HIGH QUAILTY MATERIAL:Made of high quality acrylic transparent material,Safe and secure tank for breeding, isolating or acclimating fish,also it is easy to see your baby fish.It is durable, break-resistant and easy to clean.
  • ISOLATION PLATE & PLASTIC COVER:They can reduce danger,suitable for isolating diseased,prevent the fish out of the isolation room to protect the newborn fish. It is ideal to be sick fish in fish and isolation space With sucker, anywhere convenient fixed in the tank.
  • SPACE SAVING FLOATING DESIGN:With hook hangs on the aquarium.The breeding box can be secured to the aquarium with the hooks.the grating in the bottom prevents soiling of the box by food residues and excrement.
  • HIGH SAFETY:AS a Hatchery for viviparous fish, such as bettas, guppies, medaka, ect,it can Prevent attack from adult fish, improve the survival rate of juvenile fish.It not also can protect the newborn fish,but also ideal to be sick fish and isolation chamber for pregnant fish.
  • SIZE:7.8 x 3.9 x 3.9 inch,suitable for aggressive fish, injured fish, small fish, shrimp, and other sea clownfish.
  • Manufacture: Hamiledyi
  • Item Weight: 12.7 ounces
  • Editor's Impressions Of The Hamiledyi
  • Quality [star rating='4.4']
  • Value For Money [star rating='3.8']
  • Affordability [star rating='4.6']

Hamiledyi Final Thoughts

"Just Kidding!"

I actually put it in my 10 gallon baby fry tank. With everything out the tank seems to stay really clean. The Petzilla and Lee's make observations easier. Less than 2 days and already received a replacement. I don't see how they send used stuff out as new! It's unsightly with big uneven seams and extra fabric. I have both the small and larger version.

Overall Score
4.5

[star rating="4.5"]
(8 Points)

3. YML Fish Hatchery Tank, 7 by 3 by 3-1/2-Inch

User Ratings: 57 43

YML H004 First Impressions

"It was a great purchase!"

I'm using it as a nursery for baby guppies. The Petzilla and Lee's make observations easier. One of them does not because you're supposed to add some sort of water rain bar. Lets in just enough new water to keep it clean, but not too much to have a current. Not sure why some people are complaining the the separating tray floats. The lid doesn't lock in place too snugly which make it easy to open. The suction cups were adequate and held the breeder on to the glass fairly well.

  • YML Fish Hatchery Tank, 7 by 3 by 3-1/2-Inch
  • The Floating Hatchery Come With Suctions
  • Be Suitale For Fresh And Sea Water Aquariums
  • Separate And Protect Young, Weak, Sick Fish or Spawn From Others Adult Fish
  • Includes hatchery,partitions,suctions.
  • Manufacture: YML GROUP INC
  • Product Dimensions: 7 x 3 x 3.5 inches; 4 Ounces
  • Editor's Impressions Of The YML H004
  • Quality [star rating='2.8']
  • Value For Money [star rating='3.3']
  • Affordability [star rating='4.1']

YML H004 Final Thoughts

"Good size!"

I left it out and the babies were sneaking out through that hole. She doesn't seem very stressed, honestly, and likes to nap in the V's. I usually wait to write reviews but I am already impressed with this breeding box. The net is harder to see through but not for the casual observer. So overall, this is a functioning product with little issues. I got the medium and it's mostly the width of a 10 gallon tank. The baby fish were able to swim from the bottom back to the time in the corners.

Overall Score
3.3

[star rating="3.3"]
(2 Points)

4. J-star Aquarium Breeder Box for Fish Tank, Baby Fish Separator Incubator Divider, Aquarium Baby Fish...

User Ratings: 50

J-star First Impressions

"Awesome product."

I'll put the bag from the pet shop in it and cut it open. Petzilla is larger in size which reduces crowding as the babies grow. Not sure why some people are complaining the the separating tray floats. First one arrived used with gravel and a hole in it. This is my first breeder box so I cant really compare with other brands. They seemed scared at first but calmed down after about 30 minutes. Both are designed for free floating.

  • J-star Aquarium Breeder Box for Fish Tank, Baby Fish Separator Incubator Divider, Aquarium Baby Fish Protector Acrylic Breeder Box for Baby Fishes.
  • The breeder box can be used as spawning box for betta, guppy, etc. The fish isolation box can prevent small fish from attacking and improve the survival rate of fish.
  • High-quality transparent materials, durable. Can safely and reliably breed, isolate or adapt to fish. Crystal transparent body. It's easy to observe the females giving birth.
  • Space-saving and can float automatically, this acrylic isolation box can be fixed on the aquarium wall by suction cup. The two-level combination does not take up space.
  • Perfect isolator for aggressive fish, injured fish, small fish, shrimp and other marine fishes. Fishes such as Betta, Guppy, Killifish, Clownfish and other small fishes.
  • No need to open the cover when feeding because of the design with a feeding hole on the top. The suctions cup is made with Environment-friendly materials, better adsorption.
  • Manufacture: J-star
  • Editor's Impressions Of The J-star
  • Quality [star rating='3']
  • Value For Money [star rating='4.3']
  • Affordability [star rating='3']

J-star Final Thoughts

"Suction cups are good."

We need to do mare to make sure bettas are treated better in pet stores, though. The baby fish were able to swim from the bottom back to the time in the corners. I got the medium and it's mostly the width of a 10 gallon tank. Breeder nets are available in many sizes including larger than both boxes. Breeder nets are available in many sizes including larger than both boxes. I do suggest leaving the lid above the waterline, however, as it has two holes. Unlike the males, female Bettas should get along together.

Overall Score
4.0

[star rating="4"]
(2 Points)

5. PUPUZAO Simple DIY Soda Bottle Brine Shrimp Hatchery Kit with Brine Shrimp Net

User Ratings: 48 9

PUPUZAO First Impressions

"Works as it should."

With the fry drop removed you get a really nice size little tank. I do suggest leaving the lid above the waterline, however, as it has two holes. I have found one very unique use for it though. I also like to put in a bowl with acclimating. I'm using it as a nursery for baby guppies. The babies are now in the box without the middle divider piece. Neither ended up having their babies in the breeder box.

  • PUPUZAO Simple DIY Soda Bottle Brine Shrimp Hatchery Kit with Brine Shrimp Net
  • Package Include : Soda bottle adpter kit x1 +Clear air tubing Y-connector x1 + Metal control valve x1 + air tubing x2 yard + brine shrimp sieve
  • You need an empty soda bottle and air pump,then you will have a brine shrimp hatcherty.
  • Include 2 yard air tubing(3/16'') and a Y-connector,you can use them to get air supply from your working airline.
  • Brine shrimp net ring diameter is about 2-3/4'',use to sieve newly hatched brine shrimp.
  • Manufacture: guanyu aquarium
  • Editor's Impressions Of The PUPUZAO
  • Quality [star rating='4.4']
  • Value For Money [star rating='5']
  • Affordability [star rating='3.2']

PUPUZAO Final Thoughts

"Great product!"

I own 7 of these isolation, breeding tanks. I'm using it as a nursery for baby guppies. I popped this together in a minute and it was in the tank in another minute. I have both the small and larger version. I tested both my tank and box water to find a big difference in Ammonia levels. Worked well, water and air flow is minimum due to slots being very thin. I have used other breeder boxes and like this one the best.

Overall Score
4.0

[star rating="4"]
(40 Points)

6. POPETPOP Fish Breeder Net Box for Aquarium - Fish Isolation Breeding Hatching Box Large Size Fish Nu...

POPETPOP 1821YBF19BCYOA3QZ8RC First Impressions

"Great product!"

First one arrived used with gravel and a hole in it. My kids observe the fish and write notes about health and behavior. I took the out of the tank and put them in mugs but it was not practical. We had 2 pregnant fish in seperate halves with them seperated. Each of the four corners I thought had a cap. We picked this up to use as a secondary QT box for our reef tank. 5 gallon, but he was struggling to swim.

  • POPETPOP Fish Breeder Net Box for Aquarium - Fish Isolation Breeding Hatching Box Large Size Fish Nursery Net for Aquarium Fish Tank - Easy to Install
  • It will increase the survival rate of breeded fish by separating the aggressive fish and weak fish.
  • It is constructed with soft polyester net and plastic frame.
  • This Net Hatchery is easily attached to the top of your aquarium by included suction cups.
  • This fish net can efficiently help you in breeding fish.
  • This net hatchery is easily attached to the top of your aquarium by included suction cups.
  • Manufacture: POPETPOP
  • Product Dimensions: 9.84 x 5.91 x 5.91 inches; 3.25 Ounces
  • Editor's Impressions Of The POPETPOP 1821YBF19BCYOA3QZ8RC
  • Quality [star rating='5']
  • Value For Money [star rating='4.2']
  • Affordability [star rating='4.2']

POPETPOP 1821YBF19BCYOA3QZ8RC Final Thoughts

"I'm happy with this."

I am using several to sort through some fish I am breeding. We caught momma the day before she had them and removed her after. I use this all the time for fish or new plants. I currently have about 30 or so new babies in it. Guppy fry didn't escape and they look happy. I put three pregnant females in the box immediately. The seller, Pawfly, was very nice about it.

Overall Score
5.0

[star rating="5"]
(1 Points)

7. CPR Aquatic CITR 3 Pro DX Large in Tank Refugium

CPR Aquatic First Impressions

"A good purchase for."

We did have some get stuck in the edge of the partition. They are now all back together, living as peaceably as fish can. You have to be really careful with shrimp or they die. Future design improvement- less room for fry, more room for moms. The dimensions for the large size are approximately 8. Still, everything else about the box is great! Guppy fry didn't escape and they look happy.

  • CPR Aquatic CITR 3 Pro DX Large in Tank Refugium
  • This CPR Aquatic CITR 3 Pro DX (Deluxe) Large In-Tank Refugium is the latest version of the CITR Refugiums and has an updated grate design and 20% greater flow.
  • The CITR In-Tank Refugiums are "safe houses" that provide a protected area to help newly added fish or invertebrates easily acclimate to a new tank while also providing a place for injured fish or corals to regenerate damaged tissue without the need for a separate quarantine tank.
  • The CITRs also function as a culturing area for small organisms that are intended to be provided as a food source for the inhabitants of the main portion of the tank. The versatility and easy use of the CITRs make them a valuable addition to every aquarist's tank.
  • The CITR 3 has slots cut out of the side. This CITR Pro version has a black back and is attached to the aquarium with an adjustable bracket.
  • This Deluxe version comes with a Rio+ Aqua 180 Powerhead. 11.5” L x 5.5” W x 7.5” H.
  • Manufacture: CPR Aquatic
  • Editor's Impressions Of The CPR Aquatic
  • Quality [star rating='5']
  • Value For Money [star rating='4.6']
  • Affordability [star rating='5']

CPR Aquatic Final Thoughts

"Very light!"

The seller, Pawfly, was very nice about it. There is a grate that sits about an inch above the bottom of the box. I own 7 of these isolation, breeding tanks. This product is excellent, works fabulously. Now he's chilling in quarantine until he heals. I bought one to try it out, and it's been excellent. Neither ended up having their babies in the breeder box.

Overall Score
5.0

[star rating="5"]
(1 Points)

8. Hidom Floating Fish Aquarium Hatchery Breeding and Parenting Box with Live Fry Trap

User Ratings: 62 6

Hidom First Impressions

"Good product."

Worked well, water and air flow is minimum due to slots being very thin. I highly recommend this product, simple and easy to use! No more babies swimming back up the cracks and getten eaten by mom. The babies are now in the box without the middle divider piece. I can home one day and one was dead and all torn up from the sides. We have 12 babies swimming around in our tank at the moment. The funnel tray is placed too high within the box.

  • Hidom Floating Fish Aquarium Hatchery Breeding and Parenting Box with Live Fry Trap
  • A safe floating fish haven for livebearing fish and fry.
  • Bottom compartment safely collects and protects falling fry.
  • Includes suction cups, partition and lid.
  • Can also be used for displaying Betta (Siamese Fighting) Fish.
  • Suitable for isolating sick, injured or aggressive fish.
  • Manufacture: Hidom
  • Product Dimensions: 3.94 x 2.76 x 5.12 inches; 3.53 Ounces
  • Editor's Impressions Of The Hidom
  • Quality [star rating='5']
  • Value For Money [star rating='4.1']
  • Affordability [star rating='3.4']

Hidom Final Thoughts

"Overall I did like it."

The dividers only work with the fry drop in place. I bought one to try it out, and it's been excellent. Neither ended up having their babies in the breeder box. My kids observe the fish and write notes about health and behavior. Neither ended up having their babies in the breeder box. I rated this 4 because it works great for the babies to live in for a bit. Tired of my guppies eating their fry and found this.

Overall Score
4.1

[star rating="4.1"]
(106 Points)

9. Petyoung Brine Shrimp Eggs Hatcher Incubator Hatchery Artemia Eggs Hatchery Kit DIY Aquarium Fish Ta...

User Ratings: 72

Petyoung 1318611/120337AM16UK2AQW First Impressions

"Very light!"

We caught momma the day before she had them and removed her after. I will definitely buy these kind of breeder again. The tube for the bubbler is a nice touch. The suction cups were adequate and held the breeder on to the glass fairly well. There are slats in the bottom for the babies to escape to, to keep from being eaten. I personally use these to introduce smaller fish into my community tanks. I really liked the fact I could add an airline for water flow.

  • Petyoung Brine Shrimp Eggs Hatcher Incubator Hatchery Artemia Eggs Hatchery Kit DIY Aquarium Fish Tank Hatch Tool
  • Connect with air pump, eggs can be hatched within 36-48 hours
  • Suitable for hatching all dry frozen shrimp eggs
  • Simple, practical, convenient to hatch shrimp for feeding fish.
  • Can be directly into the harvest shrimp eggs, sea salt and water
  • Made of premium material, non-toxic and durable.
  • Manufacture: Petyoung
  • Product Dimensions: 11.81 x 3.15 x 3.15 inches; 10.02 Ounces
  • Editor's Impressions Of The Petyoung 1318611/120337AM16UK2AQW
  • Quality [star rating='5']
  • Value For Money [star rating='4.8']
  • Affordability [star rating='4.8']

Petyoung 1318611/120337AM16UK2AQW Final Thoughts

"This is it."

It comes with 2 removable dividers and a removable fry drop slotted piece. The Petzilla and Lee's make observations easier. Each of the four corners I thought had a cap. Both are designed for free floating. I highly recommend this product, simple and easy to use! For me, the geatest feature is that it floats and floats evenly. The little air tube connection on the side is a nice addition too.

Overall Score
4.6

[star rating="4.6"]
(9 Points)

10. Flameer Acrylic Aquarium Fish Tank Hatchery Incubator Breeding Box

Flameer First Impressions

"The thing is awesome!"

The plastic is much thicker than the last box I bought for the same price. If you have a smaller tank, the Lee's may be the better choice. It comes with 2 suction cups for when you want it to stay in place. Super strong suction cups- I have both the small and large. I actually put it in my 10 gallon baby fry tank. They are now all back together, living as peaceably as fish can. I do suggest leaving the lid above the waterline, however, as it has two holes.

  • Flameer Acrylic Aquarium Fish Tank Hatchery Incubator Breeding Box
  • It can Separate aggressive fish, injured fish, small fish, shrimp, and other sea clownfish
  • Unique floating and transparent plastic cover designed to prevent the fish out of the isolation room to protect the newborn fish. It is ideal to be sick fish in fish and isolation space
  • It is a Hatchery for viviparous fish, such as bettas, guppies, medaka, ect. It can Prevent attack from adult fish, improve the survival rate of juvenile fish
  • Self-floating design with suction cup/hanger, 2-layer combination does not occupy space
  • With sucker/hanger, anywhere convenient fixed in the tank
  • Manufacture: Flameer
  • Editor's Impressions Of The Flameer
  • Quality [star rating='3.7']
  • Value For Money [star rating='3.6']
  • Affordability [star rating='2.1']

Flameer Final Thoughts

"It is nice and clear."

Kind of a pain to remove the lid and feed the fry. The dividers only work with the fry drop in place. Especially if you plan to hold the babies there for a while. Good size and I like the separated chambers. I do suggest leaving the lid above the waterline, however, as it has two holes. Guppy fry didn't escape and they look happy. So overall, this is a functioning product with little issues.

Overall Score
3.0

[star rating="3"]
(1 Points)

Copyright © 2024 Rob Aquatics — Primer Child WordPress theme by GoDaddy