Editor's Choice - Our Favorite Petforu Fish Breeding Tanks

1. Petforu Aquarium Breeding Tank Acrylic Reptile Feeding Box with Temperature Hygrometer (Small)

User Ratings: 52 13

Petforu First Impressions

"Wash before use."

My husband got me a few guppies that apparently had been pregnant. Worked great for me and my need to separate babies from the rest of the tank. Mine's been doing fine and very useful. I actually put it in my 10 gallon baby fry tank. Still, everything else about the box is great! I put the rainbar into it so now they can't escape. I have found one very unique use for it though.

  • Petforu Aquarium Breeding Tank Acrylic Reptile Feeding Box with Temperature Hygrometer (Small)
  • Suitable for raising spiders, house lizard, small turtles, frogs, corn snakes and other small animals.
  • This box can also create water, land, rain forests, deserts and other environments.
  • Great enclosure for Baby Reptiles! Perfect size. And easy access for feeding.
  • SIZE: 11.42"x7.72"x5.91" [29cm*19.6cm*15cm]; Material: Acrylic
  • Warm Tips: If the item arrives damaged, please directly contact the vendor and request a new replacement for free, thanks for your attention!
  • Manufacture: Petforu
  • Editor's Impressions Of The Petforu
  • Quality
  • Value For Money
  • Affordability

Petforu Final Thoughts

"I really like it."

I tested both my tank and box water to find a big difference in Ammonia levels. Took me a little while to figure it out but it worked for me. I really liked the fact I could add an airline for water flow. I highly recommend this product, simple and easy to use! We did have some get stuck in the edge of the partition. I'm using it as a nursery for baby guppies. Took me a little while to figure it out but it worked for me.

Overall Score
3.9


(165 Points)

Peoples Choice - Other Highly Rated Petforu Fish Breeding Tanks

2. Petforu Aquarium Breeding Tank Acrylic Reptile Feeding Box with Temperature Hygrometer (Large)

User Ratings: 43 25

Petforu First Impressions

"Great product!"

The funnel tray is placed too high within the box. Two days later and we have about 20 babies swimming in the bottom part of the box. I tested both my tank and box water to find a big difference in Ammonia levels. I actually put it in my 10 gallon baby fry tank. It's roomy and gives them space to move around. Instead of catching babies, I simply leave the mom in the top piece. As with many plastics, if it isn't thick enough, then it can break.

  • Petforu Aquarium Breeding Tank Acrylic Reptile Feeding Box with Temperature Hygrometer (Large)
  • Suitable for raising spiders, house lizard, small turtles, frogs, corn snakes and other small animals.
  • This box can also create water, land, rain forests, deserts and other environments.
  • Great enclosure for Baby Reptiles! Perfect size. And easy access for feeding.
  • LARGE: 14.76"x9.69"x7.64" [37.5cm*24.6cm*19.4cm]
  • Material: Acrylic; Warm Tips: If the item arrives damage, please directly contact the vendor and request a new replacement for free, thanks for your attention!
  • Manufacture: Petforu
  • Editor's Impressions Of The Petforu
  • Quality
  • Value For Money
  • Affordability

Petforu Final Thoughts

"A good purchase for."

We did have some get stuck in the edge of the partition. She doesn't seem very stressed, honestly, and likes to nap in the V's. Neither ended up having their babies in the breeder box. I do suggest leaving the lid above the waterline, however, as it has two holes. In the picture, the Petzilla Aquarium Fish Breeder box is on the right. She doesn't seem very stressed, honestly, and likes to nap in the V's. I don't see how they send used stuff out as new!

Overall Score
3.6


(12 Points)

3. Marina Hang-On Breeding Box

User Ratings: 73 4

Marina 10942 First Impressions

"Hope this is helpful."

This product is excellent, works fabulously. I am using several to sort through some fish I am breeding. I also like to put in a bowl with acclimating. Perfect for holding my guppy babies. We have 12 babies swimming around in our tank at the moment. They are now all back together, living as peaceably as fish can. I feel like this breeder box is sturdier than some others that I've used.

  • Marina Hang-On Breeding Box
  • Safe & secure tank for breeding, isolating or acclimating fish
  • Multi-purpose use
  • Space saving design
  • Hangs on the outside of the aquarium
  • 0.3 gallons
  • Multi-PurposeS
  • afe & secure tank for breeding, isolating or acclimatizing fish or shrimpS
  • pace-saving design, easily installs on the exterior of the aquarium U
  • Manufacture: Marina
  • Product Dimensions: 5.2 x 6.8 x 5.3 inches; 8.96 Ounces
  • Editor's Impressions Of The Marina 10942
  • Quality
  • Value For Money
  • Affordability

Marina 10942 Final Thoughts

"Works like a charm."

We had 2 pregnant fish in seperate halves with them seperated. I have noticed that with all they pieces in that food does not exit the bottom half. I got the medium and it's mostly the width of a 10 gallon tank. The breeder box has a decent size for isolating fish or dwarf shrimp. I have both the small and larger version. I feel like this breeder box is sturdier than some others that I've used. I also like that it goes in to the tank and not a hang on the outside type.

Overall Score
4.5


(1982 Points)

4. COMOK Fish Hatchery Breeder Box Aquarium Separation Net Nylon Incubator Mesh Fish Breeding Tanks Iso...

User Ratings: 37 22

COMOK First Impressions

"Cheap but works good."

So far, those have both held up, so the non-locking lid has not been an issue. Each of the four corners I thought had a cap. Breeder nets are available in many sizes including larger than both boxes. The breeder box has a decent size for isolating fish or dwarf shrimp. I can home one day and one was dead and all torn up from the sides. Worked great for me and my need to separate babies from the rest of the tank. As with many plastics, if it isn't thick enough, then it can break.

  • COMOK Fish Hatchery Breeder Box Aquarium Separation Net Nylon Incubator Mesh Fish Breeding Tanks Isolation Box
  • Product Name: Aquarium Net Breeder;Color:Green;White
  • Safely separates new-born fry from other fish,improve the survival rate of juvenile fish. Upgraded Mesh design allow for optimum water flow.
  • Fish tank is made of plastic and nylon. It can let your fish have fresh air. Hatchery breeding for baby breeding for small baby fish,such as betta.
  • The unique floating design, can move anywhere, not sink. It does not occupy space. There are cracks on both sides, to ensure the flow of water within the tank and isolation box.
  • Package Content: 1 x Aquarium Net Breeder, 4 x Suction Cups; Net Weight: 130g
  • Manufacture: COMOK
  • Editor's Impressions Of The COMOK
  • Quality
  • Value For Money
  • Affordability

COMOK Final Thoughts

"I purchased the med."

There are slats in the bottom for the babies to escape to, to keep from being eaten. Much easier to use and install than those tank partitions. I also has a lid with snaps in place and has 2 slotted circles for dropping food in. The breeder box has a decent size for isolating fish or dwarf shrimp. This is the best floating breeder I have ever tried. Worked great for me and my need to separate babies from the rest of the tank. I also has a lid with snaps in place and has 2 slotted circles for dropping food in.

Overall Score
3.5


(8 Points)

5. PUPUZAO Simple DIY Soda Bottle Brine Shrimp Hatchery Kit with Brine Shrimp Net

User Ratings: 48 9

PUPUZAO First Impressions

"Works as it should."

With the fry drop removed you get a really nice size little tank. I do suggest leaving the lid above the waterline, however, as it has two holes. I have found one very unique use for it though. I also like to put in a bowl with acclimating. I'm using it as a nursery for baby guppies. The babies are now in the box without the middle divider piece. Neither ended up having their babies in the breeder box.

  • PUPUZAO Simple DIY Soda Bottle Brine Shrimp Hatchery Kit with Brine Shrimp Net
  • Package Include : Soda bottle adpter kit x1 +Clear air tubing Y-connector x1 + Metal control valve x1 + air tubing x2 yard + brine shrimp sieve
  • You need an empty soda bottle and air pump,then you will have a brine shrimp hatcherty.
  • Include 2 yard air tubing(3/16'') and a Y-connector,you can use them to get air supply from your working airline.
  • Brine shrimp net ring diameter is about 2-3/4'',use to sieve newly hatched brine shrimp.
  • Manufacture: guanyu aquarium
  • Editor's Impressions Of The PUPUZAO
  • Quality
  • Value For Money
  • Affordability

PUPUZAO Final Thoughts

"Great product!"

I own 7 of these isolation, breeding tanks. I'm using it as a nursery for baby guppies. I popped this together in a minute and it was in the tank in another minute. I have both the small and larger version. I tested both my tank and box water to find a big difference in Ammonia levels. Worked well, water and air flow is minimum due to slots being very thin. I have used other breeder boxes and like this one the best.

Overall Score
4.0


(40 Points)

6. Maxmartt Brine Shrimp Eggs, brine Shrimp hatcher,Incubator Incubator Hatchery Artemia Aquarium

User Ratings: 51 11

Maxmartt First Impressions

"This is not a small box."

It comes with 2 removable dividers and a removable fry drop slotted piece. With the fry drop removed you get a really nice size little tank. With everything out the tank seems to stay really clean. Easily accommodates two Molly's, swords or platy fish. Hope you found this review helpful! This product is excellent, works fabulously. We had 2 pregnant fish in seperate halves with them seperated.

  • Maxmartt Brine Shrimp Eggs, brine Shrimp hatcher,Incubator Incubator Hatchery Artemia Aquarium
  • Made of high quality materials, non-toxic and durable.
  • Suitable for hatching various dried frozen shrimp eggs, with professional design and good hatching.
  • Durable, high strength and excellent aquarium. Simple, practical, easy to hatch shrimp to feed fish.
  • Connected to the air pump, eggs can hatch in 36-48 hours.
  • Height: 27.5cm / 10.83in Outer diameter: 5cm / 1.97in Thickness: 0.2cm / 0.08in.
  • Manufacture: Maxmartt
  • Editor's Impressions Of The Maxmartt
  • Quality
  • Value For Money
  • Affordability

Maxmartt Final Thoughts

"Very satisfied."

No more babies swimming back up the cracks and getten eaten by mom. The lid doesn't lock in place too snugly which make it easy to open. My husband got me a few guppies that apparently had been pregnant. 5 gallon, but he was struggling to swim. Much easier to use and install than those tank partitions. I will update after the babies are born but so far this is great. I have two female Bettas and a Pleco in a filtered, heated 15-gallon tank.

Overall Score
3.9


(13 Points)

7. WEAVERBIRD Fish Hatchery Glass Incubator, Aquarium Cichlids Fish Egg Incubator Tumbler Fish Hatchery...

User Ratings: 49 6

WEAVERBIRD First Impressions

"Mines in the mail ."

You have to be really careful with shrimp or they die. He had room to still swim around and I didn't feel too guilty. I currently have about 30 or so new babies in it. Definitely worth buying if you need to separate fish for any reason. I use this all the time for fish or new plants. I use this all the time for fish or new plants. I have two female Bettas and a Pleco in a filtered, heated 15-gallon tank.

  • WEAVERBIRD Fish Hatchery Glass Incubator, Aquarium Cichlids Fish Egg Incubator Tumbler Fish Hatchery Breeding for Shrimp Fish
  • Fish eggs incubator: Made of high quality glass material, for raising hatching fish eggs.Quality assurance, environmental protection and safety.
  • Easy to install: Suction tube clamp is soft and easy to install, but still not easy to scratch the incubator director. Mesh uniform and dense to ensure smooth flow of water and improve hatch ability.
  • Fish incubator: Air-lift joints with a 45 degree camber make the water flows more smoothly, which can be driven by a small air pump. The bracket is transparent tube for easy observation.
  • Incubation purpose: Allow fresh water to circulate over cichlid eggs that have been separated from the parents, a fresh supply of clean water allows the eggs to develop in an oxygen rich environment.
  • Sweet tips: Hatching fish eggs, you need to use the same fish tank water, so that fish eggs adapt to the environment..
  • Manufacture: WEAVERBIRD
  • Editor's Impressions Of The WEAVERBIRD
  • Quality
  • Value For Money
  • Affordability

WEAVERBIRD Final Thoughts

"Great purchase!"

Worked well, water and air flow is minimum due to slots being very thin. I feel like this breeder box is sturdier than some others that I've used. I really like the design of this breeder box. I personally use these to introduce smaller fish into my community tanks. They seemed scared at first but calmed down after about 30 minutes. So overall, this is a functioning product with little issues. So far, those have both held up, so the non-locking lid has not been an issue.

Overall Score
3.7


(8 Points)

8. Reptile Rearing Box Reptile Breeding Box Reptile Terrarium Cage Hibernation Incubator with Heating P...

LiFuJunDong First Impressions

"Flow is just a trickle."

She doesn't seem very stressed, honestly, and likes to nap in the V's. If that bottom piece fit better it would have been perfect. I put three pregnant females in the box immediately. With everything out the tank seems to stay really clean. Especially if you plan to hold the babies there for a while. Perfect for holding my guppy babies. I will update after the babies are born but so far this is great.

  • Reptile Rearing Box Reptile Breeding Box Reptile Terrarium Cage Hibernation Incubator with Heating Pad Hygrometer for Tortoise Spider Scorpion Snake Horned Frog Lizard Snail Pet Breeding Box 220V
  • ★ 1)Specifically designed for pets to spend winter.
  • ★2)The Acrylic cabinet has high durability.
  • ★3)Specialized and scale breeding.
  • ★ 4)With a thermometer and hygrometer, you can observe the temperature and humidity easily.
  • ★5)The configuration of the breeding box is divided into water and land.
  • Manufacture: LiFuJunDong
  • Item Weight: 12 pounds
  • Editor's Impressions Of The LiFuJunDong
  • Quality
  • Value For Money
  • Affordability

LiFuJunDong Final Thoughts

"Good size!"

Tired of my guppies eating their fry and found this. So it IS possible for very small fry to slip through the slits. So it IS possible for very small fry to slip through the slits. Fits nicely in a size 10 gallon tank. This keeps her area better airated and actually helps flow the babies out. Kind of a pain to remove the lid and feed the fry. It is large enough for fish bigger than guppies.

Overall Score
5.0


(2 Points)

9. Petzilla in-Tank Aquarium Breeder Box for Fish Tank, Breeding Incubator for Small Fish Hatchery, Acr...

User Ratings: 53 11

Petzilla PBI-1 First Impressions

"Tried him in a 3."

So overall, this is a functioning product with little issues. It comes with 2 suction cups for when you want it to stay in place. It comes with 2 suction cups for when you want it to stay in place. Perfect for holding my guppy babies. It works as it is designed to do and kept my fry safe. That way the water still flows nicely in where mom is. I have both the small and larger version.

  • Petzilla in-Tank Aquarium Breeder Box for Fish Tank, Breeding Incubator for Small Fish Hatchery, Acrylic Divider for Shrimp Clownfish Aggressive Fish Injured Fish
  • This breeder box can prevent the baby fish from the adult fish's attack and improve the survival rate of the baby fish.
  • Perfect isolator for aggressive fish, injured fish, small fish, shrimp and other marine fishes. Fishes such as Guppies, Tetras, Platties, Damsel, Clownfish and other small fishes about 1 inch may fit in.
  • Petzilla breeding incubator is made of high-quality acrylic, double layers space-saving combination.
  • In-tank & adherent hang-on design, side vents allow for optimum water flow.
  • Authentic quality & professional breeding divider
  • Manufacture: Petzilla
  • Product Dimensions: 3.11 x 2.8 x 4.29 inches; 3.21 Ounces
  • Editor's Impressions Of The Petzilla PBI-1
  • Quality
  • Value For Money
  • Affordability

Petzilla PBI-1 Final Thoughts

"Works like a charm."

The tube for the bubbler is a nice touch. It would have been nice to have the suction cups. Tired of my guppies eating their fry and found this. Instead of catching babies, I simply leave the mom in the top piece. I have found one very unique use for it though. I personally use these to introduce smaller fish into my community tanks. There is a grate that sits about an inch above the bottom of the box.

Overall Score
3.9


(660 Points)

10. She-love Aquarium Fish Tank, Guppy Double Breeding Breeder Rearing Trap Box Hatchery

User Ratings: 46 16

She-love First Impressions

"I recommend this box."

For me, the geatest feature is that it floats and floats evenly. Hope you found this review helpful! The plastic is much thicker than the last box I bought for the same price. I tested both my tank and box water to find a big difference in Ammonia levels. My kids observe the fish and write notes about health and behavior. The suction cups hold well, and it has floating handle chambers as a backup. No trying to get mom back out while trying to keep babies in.

  • She-love Aquarium Fish Tank, Guppy Double Breeding Breeder Rearing Trap Box Hatchery
  • ISOLATION: Can be used as a separate box to isolate aggressive fish, injured fish, or sick fish to protect them from attack.
  • HATCH: The fish lays its eggs directly to the bottom of the bottom, and enters the hatchery to prevent the fish eggs from being eaten.
  • FEEDING: Can be used as the spawning box for the viviparous fish, or the young fish alone feeding the space, prevent the attack, raise the survival rate of juvenile fish.
  • TRANSPARENT BOX BODY: Crystal clear box body, can directly watch the mother fish lay eggs and small fish daily growth, add endless life fun.
  • SIZA:Small: 8 * 7 * 11cm / 3.15 * 2.75 * 4.33in (L * W * H);Large: 9.5 * 7 * 13cm / 3.74 * 2.75 * 5.12in (L * W * H)
  • Manufacture: She-love
  • Editor's Impressions Of The She-love
  • Quality
  • Value For Money
  • Affordability

She-love Final Thoughts

"Assembly was fine."

I will update after the babies are born but so far this is great. I tested both my tank and box water to find a big difference in Ammonia levels. So it IS possible for very small fry to slip through the slits. When I came across this one that showed the actual inner dimensions, I was impressed. I ordered this product for my Balloon mollie babies. I have noticed that with all they pieces in that food does not exit the bottom half. It's a decent size for an internal breeder box.

Overall Score
3.8


(18 Points)

Copyright © 2021 Rob Aquatics — Primer Child WordPress theme by GoDaddy