Editor's Choice - Our Favorite Pssopp Fish Breeding Tanks

1. Pssopp Fish Tank Breeding Isolation Box Breeder Isolation Divider Hatching Box Acrylic Transparent A...

User Ratings: 24 14

Pssopp First Impressions

"My fishes will be happy!"

I currently have about 30 or so new babies in it. We did have some get stuck in the edge of the partition. I rated this 4 because it works great for the babies to live in for a bit. I gave 4 stars becauses the mesh gets algae ridden pretty easily and stained green. I really liked the fact I could add an airline for water flow. I never knew how important this was until tank cleaning time! I have used other breeder boxes and like this one the best.

  • Pssopp Fish Tank Breeding Isolation Box Breeder Isolation Divider Hatching Box Acrylic Transparent Aquarium Hatchery Incubator Holder
  • 【Steady】It has double fixation to prevent shedding, can adjust the height of the box. And Screw reinforcement makes it steady and don't shake, prevents distortion.
  • 【Distinguish Different fishes】The isolation box comes with isolation board, which makes it easy to divide different fish samples.
  • 【High Quality】Made of high quality acrylic material, it is non-toxic and eco-friendly, durable and has a long service life.
  • 【Transparent Design】Our product applies transparent design, has high transmittance effect and resistance to impact, you can observe the fish.
  • 【Easy Installation】With hook and sucker design, it is easy to install and convenient to use.
  • Manufacture: Pssopp
  • Editor's Impressions Of The Pssopp
  • Quality
  • Value For Money
  • Affordability

Pssopp Final Thoughts

"Over all pretty good."

Unlike the males, female Bettas should get along together. I am using several to sort through some fish I am breeding. This is my first breeder box so I cant really compare with other brands. I left it out and the babies were sneaking out through that hole. I got this so I can just put him in our 20-gallon hex with the angelfish. Hope you found this review helpful! I really liked the fact I could add an airline for water flow.

Overall Score
3.3


(14 Points)

Peoples Choice - Other Highly Rated Pssopp Fish Breeding Tanks

2. Pssopp Fish Incubator Mesh Box Fish Tank Isolation Box Fish Breeder Net Fry Hatchery Incubator with ...

User Ratings: 50 50

Pssopp First Impressions

"Arrived on time."

There is a grate that sits about an inch above the bottom of the box. He had room to still swim around and I didn't feel too guilty. Worked well, water and air flow is minimum due to slots being very thin. I put three pregnant females in the box immediately. I currently have about 30 or so new babies in it. The Petzilla and Lee's make observations easier. Apparently my purple Betta, Dragonfruit, did not get the memo.

  • Pssopp Fish Incubator Mesh Box Fish Tank Isolation Box Fish Breeder Net Fry Hatchery Incubator with Suction Cup Isolation Board
  • 【Independent Space】Comes with isolation board, It not only can prevent the baby fish from the adult fish's attack and improve the survival rate of the baby fish, but also ideal to be sick fish and isolation chamber for pregnant fish. Suitable for hatching fish roe and shrimp egg in fish tank and aquarium.
  • 【4 Suction Cups】With 4 suction cups, convenient to fix and move. You can easily stick it on the glass.
  • 【High Quality】Our fish breeder adopts quality mesh material to ensure the flow of water within the tank and isolation box. Nontoxic and harmless material, safe for your baby fishes and shrimps.
  • 【Simple Assembly】Multi-fuctional, new frame style with removable, locking legs, convenient for the protection of the fishes. Easy installation, easy to use.
  • 【Widely Used】It is suitable for all kinds of aquarium, cold water, tropical and marine fish.
  • Manufacture: Pssopp
  • Product Dimensions: 3.94 x 3.94 x 3.94 inches; 4.23 Ounces
  • Editor's Impressions Of The Pssopp
  • Quality
  • Value For Money
  • Affordability

Pssopp Final Thoughts

"My fishes will be happy!"

With the fry drop in you have plenty of room for temporarily keeping the females. That way the water still flows nicely in where mom is. Guppy fry didn't escape and they look happy. I also like that it goes in to the tank and not a hang on the outside type. Undeniably the best seller I've encountered. Still, everything else about the box is great! I ordered this and it came next day.

Overall Score
3.0


(5 Points)

3. Green Aquarium Fish Breeder Box Nylon Mesh Fish Fry Hatchery Breeder Box Separation Net(26.5x15x15...

NGe First Impressions

"It does work."

First one arrived used with gravel and a hole in it. It's unsightly with big uneven seams and extra fabric. 5 gallon, but he was struggling to swim. It is large enough for fish bigger than guppies. The suction cups were adequate and held the breeder on to the glass fairly well. I really like that it has suction cups, and is very sturdy on the glass. Neither ended up having their babies in the breeder box.

  • Green Aquarium Fish Breeder Box Nylon Mesh Fish Fry Hatchery Breeder Box Separation Net(26.5x15x15CM)
  • Product Name: Aquarium Net Breeder
  • Color: White, Green; Material: Plastic, Nylon
  • Total Size: 26.5 x 15 x 15cm / 10.43" x 5.91" x 5.91" (L*W*H)
  • Package Content: 1 x Aquarium Net Breeder, 6 x Suction Cups
  • Net Weight: 154g
  • Manufacture: NGe
  • Editor's Impressions Of The NGe
  • Quality
  • Value For Money
  • Affordability

NGe Final Thoughts

"Every thing else is good."

I will update after the babies are born but so far this is great. They seemed scared at first but calmed down after about 30 minutes. With the fry drop in you have plenty of room for temporarily keeping the females. Each of the four corners I thought had a cap. I have used other breeder boxes and like this one the best. He's happy just sitting on his plant blowing bubbles. I will update after the babies are born but so far this is great.

Overall Score
5.0


(1 Points)

4. Mironey 3.46" x 2.6" x 2.83" Aquarium Fish Breeder Box Baby Fish Separator Fish Tank Divider Fish Ta...

Mironey First Impressions

"I did read reviews first."

I've used several other floating breeders, and have always wished they were larger. I didn't have the space for an external one. I have found one very unique use for it though. I rated this 4 because it works great for the babies to live in for a bit. I have two female Bettas and a Pleco in a filtered, heated 15-gallon tank. I left it out and the babies were sneaking out through that hole. Future design improvement- less room for fry, more room for moms.

  • Mironey 3.46" x 2.6" x 2.83" Aquarium Fish Breeder Box Baby Fish Separator Fish Tank Divider Fish Tank Hatchery Breeding Tank
  • This aquarium isolator box is gteat for aggressive fish,injured fish,small fish,etc.
  • The side ventilation holes can achieve the best water flow.
  • Total Size:88 x 66 x 72mm/3.46" x 2.6" x 2.83"(L*W*H).
  • This breeding box can effectively prevent baby fish from being attacked by adult fish and improve the survival rate of juvenile fish.
  • Self-floating wall-mounted design with suction cup.Double layers space-saving combination make you can use the hatchery breeder tank by separately.
  • Manufacture: Mironey
  • Item Weight: 2.46 ounces
  • Editor's Impressions Of The Mironey
  • Quality
  • Value For Money
  • Affordability

Mironey Final Thoughts

"Suction cups are good."

As with many plastics, if it isn't thick enough, then it can break. If that bottom piece fit better it would have been perfect. I usually wait to write reviews but I am already impressed with this breeding box. Worked great for me and my need to separate babies from the rest of the tank. Much easier to use and install than those tank partitions. We picked this up to use as a secondary QT box for our reef tank. This keeps her area better airated and actually helps flow the babies out.

Overall Score
4.0


(1 Points)

5. POPETPOP Fish Tank Breeder Net - Big Size Fish Hatchery Breeder Box Separation Net - Fry Hatchery In...

User Ratings: 53 13

POPETPOP First Impressions

"Works great!"

I have noticed that with all they pieces in that food does not exit the bottom half. I had a 2 pregnant guppies and bought this for them. Easily accommodates two Molly's, swords or platy fish. I'll put the bag from the pet shop in it and cut it open. I have found one very unique use for it though. I tested both my tank and box water to find a big difference in Ammonia levels. Future design improvement- less room for fry, more room for moms.

  • POPETPOP Fish Tank Breeder Net - Big Size Fish Hatchery Breeder Box Separation Net - Fry Hatchery Incubator Mesh with Suction Cup for Aquarium
  • Fish breeder net will increase the survival rate of breeded fish by separating the aggressive fish and weak fish.
  • This net hatchery is easily attached to the top of your aquarium by included suction cups.
  • It is constructed with soft polyester net and plastic frame.
  • This fish net can efficiently help you in breeding fish.
  • It is of good quality, durable and practical to use.
  • Manufacture: POPETPOP
  • Product Dimensions: 9.84 x 5.91 x 5.91 inches; 3.25 Ounces
  • Editor's Impressions Of The POPETPOP
  • Quality
  • Value For Money
  • Affordability

POPETPOP Final Thoughts

"Very satisfied."

He had room to still swim around and I didn't feel too guilty. I will update after the babies are born but so far this is great. This is my first breeder box so I cant really compare with other brands. With the fry drop in you have plenty of room for temporarily keeping the females. If you have a smaller tank, the Lee's may be the better choice. This works better at protecting babies from mom than the one room nets. Future design improvement- less room for fry, more room for moms.

Overall Score
3.9


(90 Points)

6. BOYU Aquarium Fish Breeder Box Isolation Box Breeder Hatchery Incubator

User Ratings: 59 5

BOYU First Impressions

"Imperfect design."

When I came across this one that showed the actual inner dimensions, I was impressed. Took me a little while to figure it out but it worked for me. Perfect for holding my guppy babies. I own 7 of these isolation, breeding tanks. I took out the part that separates the parent from the babies. I rated this 4 because it works great for the babies to live in for a bit. I usually wait to write reviews but I am already impressed with this breeding box.

  • BOYU Aquarium Fish Breeder Box Isolation Box Breeder Hatchery Incubator
  • ✔ Upgraded Mesh design allow for optimum water flow.
  • ✔ Can be used as the spawning box for the viviparous fishes.
  • ✔ Isolates injured or aggressive fish, or small fish, shrimp.
  • ✔ Easily attached to the top of your aquarium by the included suction cups.
  • ✔ Safely separates new-born fry from other fish,improve the survival rate of juvenile fish.
  • Manufacture: BOYU
  • Product Dimensions: 2.48 x 2.24 x 5.91 inches; 3.52 Ounces
  • Editor's Impressions Of The BOYU
  • Quality
  • Value For Money
  • Affordability

BOYU Final Thoughts

"I did read reviews first."

No trying to get mom back out while trying to keep babies in. I actually put it in my 10 gallon baby fry tank. I didn't have the space for an external one. This product is excellent, works fabulously. No more babies swimming back up the cracks and getten eaten by mom. I had a 2 pregnant guppies and bought this for them. I have two female Bettas and a Pleco in a filtered, heated 15-gallon tank.

Overall Score
4.2


(238 Points)

7. Ailindany Aquarium Cichlids Fish Egg Incubator Tumbler Fish Hatchery Mouth-Brooding 50mm

User Ratings: 61

Ailinda First Impressions

"Hope this is helpful."

It comes with 2 removable dividers and a removable fry drop slotted piece. If that bottom piece fit better it would have been perfect. I don't see how they send used stuff out as new! It's roomy and gives them space to move around. Not as sturdy as I thought but perfect for what I wanted. 5 gallon, but he was struggling to swim. Not as sturdy as I thought but perfect for what I wanted.

  • Ailindany Aquarium Cichlids Fish Egg Incubator Tumbler Fish Hatchery Mouth-Brooding 50mm
  • Made of non-toxic plastic material, hatching for raising fish eggs.
  • Suction tube clamp soft, easy to install, not easy to scratch the incubator director.
  • Hatching fish eggs, you need to use the same fish tank water, so that fish eggs adapt to the environment.
  • Size:diameter 50mm. Allows egg incubation in same tank as fish are breeding in to provide identical water conditions during incubation period.
  • The purpose of an egg tumbler is to allow fresh water to circulate over cichlid eggs that have been separated from the parents,a fresh supply of clean water allows the eggs to develop in an oxygen rich environment.
  • Manufacture: Ailinda
  • Editor's Impressions Of The Ailinda
  • Quality
  • Value For Money
  • Affordability

Ailinda Final Thoughts

"So this is what I did."

There are slats in the bottom for the babies to escape to, to keep from being eaten. Tired of my guppies eating their fry and found this. I have safe little fry and more to come! I'll put the bag from the pet shop in it and cut it open. It's unsightly with big uneven seams and extra fabric. We have 12 babies swimming around in our tank at the moment. It's a decent size for an internal breeder box.

Overall Score
4.4


(18 Points)

8. Pawfly Fish Breeding Box Tank Hatchery Incubator Aquarium Isolation Box for Baby Shrimp Guppy – Me...

User Ratings: 62 8

Pawfly First Impressions

"Clear plastic EZ to use."

Future design improvement- less room for fry, more room for moms. I put three pregnant females in the box immediately. Not sure why some people are complaining the the separating tray floats. I popped this together in a minute and it was in the tank in another minute. We picked this up to use as a secondary QT box for our reef tank. I got the medium and it's mostly the width of a 10 gallon tank. I feel like this breeder box is sturdier than some others that I've used.

  • Pawfly Fish Breeding Box Tank Hatchery Incubator Aquarium Isolation Box for Baby Shrimp Guppy – Medium
  • Medium Size: Inner size of 5.5"L x 3.8"W x 3.8"H. Creates a safe and secure breeding nursery for small fry while monitors your baby fish easily.
  • Ideal Breeder Tank: A must-have separating hatchery for pregnant betta or guppies, protecting new born fry from being eaten or attacked, improve the survival rate of newborn fish.
  • Versatile Isolation Box: Bottom separator with small slots can prevent the new born fry, shrimp to escape. Removable divider of customized size and number of chambers for different needs. Especially for aggressive fish or injured fish.
  • Space-Saving: Hangs on tightly to the inside of the tank with 2 suction cups. Side vents allow for optimum water flow, requires no additional heaters or air pump.
  • Easy Maintenance: Detachable design, easy to disassemble and clean. No tools needed.
  • Manufacture: Pawfly
  • Editor's Impressions Of The Pawfly
  • Quality
  • Value For Money
  • Affordability

Pawfly Final Thoughts

"Great design."

Unlike the males, female Bettas should get along together. Neither ended up having their babies in the breeder box. Unlike the males, female Bettas should get along together. This product is good for the price. This keeps her area better airated and actually helps flow the babies out. I am using several to sort through some fish I am breeding. It would have been nice to have the suction cups.

Overall Score
4.3


(66 Points)

9. POPETPOP Fish Nursery for Aquarium-Fish Breeding Net Hang on Breeder Box,Fish Breeder Box for Hatche...

User Ratings: 47 17

POPETPOP First Impressions

"Only put about 30 gal."

They are now all back together, living as peaceably as fish can. I actually put it in my 10 gallon baby fry tank. Kind of a pain to remove the lid and feed the fry. This is the best floating breeder I have ever tried. He had room to still swim around and I didn't feel too guilty. I took out the part that separates the parent from the babies. The lid doesn't lock in place too snugly which make it easy to open.

  • POPETPOP Fish Nursery for Aquarium-Fish Breeding Net Hang on Breeder Box,Fish Breeder Box for Hatchery-Large Size
  • This net hatchery is easily attached to the top of your aquarium by included suction cups.
  • It is constructed with soft polyester net and plastic frame.
  • It will increase the survival rate of breeded fish by separating the aggressive fish and weak fish.
  • This fish net can efficiently help you in breeding fish.
  • It is of good quality, durable and practical to use.
  • Manufacture: POPETPOP
  • Product Dimensions: 9.84 x 5.91 x 5.91 inches; 3.25 Ounces
  • Editor's Impressions Of The POPETPOP
  • Quality
  • Value For Money
  • Affordability

POPETPOP Final Thoughts

"Awesome product."

I will definitely buy these kind of breeder again. The breeder box has a decent size for isolating fish or dwarf shrimp. You have to be really careful with shrimp or they die. This product is good for the price. For me, the geatest feature is that it floats and floats evenly. So overall, this is a functioning product with little issues. I have found one very unique use for it though.

Overall Score
3.7


(31 Points)

10. Baoblaze Stainless Steel Aquarium Fish Tank Inflow Pipe &

Baoblaze First Impressions

"It is nice and clear."

Guppy fry didn't escape and they look happy. Hope you found this review helpful! That's why I took time to come back. As with many plastics, if it isn't thick enough, then it can break. They seemed scared at first but calmed down after about 30 minutes. They are now all back together, living as peaceably as fish can. It's plastic but I have used it for several months and it’s help up well.

  • Baoblaze Stainless Steel Aquarium Fish Tank Inflow Pipe &
  • The mirror polished water pipes give superb appearance to your aquarium, adding elegant look to your aquarium.
  • Made of high-grade stainless steel, sturdy, rust and corrosion resistant, will absolutely do no harm to your plants or fish.
  • 2 sizes available (12mm inner diameter and 16mm inner diameter) to meet your different needs.
  • Easy to clean as well as installation.
  • Each pack includes inflow and outflow pipe and acrylic fixation set.
  • Manufacture: Baoblaze
  • Editor's Impressions Of The Baoblaze
  • Quality
  • Value For Money
  • Affordability

Baoblaze Final Thoughts

"No, really, I'm kidding."

Suction cups do not hold the box up under its own weight. We have 12 babies swimming around in our tank at the moment. Instead of catching babies, I simply leave the mom in the top piece. If that bottom piece fit better it would have been perfect. This product is good for the price. Much easier to use and install than those tank partitions. I took the out of the tank and put them in mugs but it was not practical.

Overall Score
5.0


(1 Points)

Copyright © 2021 Rob Aquatics — Primer Child WordPress theme by GoDaddy